Hi Paul,
On 26 July 2016 at 16:24, Paul Burton <paul.bur...@imgtec.com> wrote:
> Previously ns16550 compatible UARTs probed via device tree have needed
> their device tree nodes to contain a clock-frequency property. An
> alternative to this commonly used with Linux is to reference a clock via
> a phandle. This patch allows U-Boot to support that, retrieving the
> clock frequency by probing the appropriate clock device.
>
> For example, a system might choose to provide the UART base clock as a
> reference to a clock common to multiple devices:
>
> sys_clk: clock {
> compatible = "fixed-clock";
> #clock-cells = <0>;
> clock-frequency = <10000000>;
> };
>
> uart0: uart@10000000 {
> compatible = "ns16550a";
> reg = <0x10000000 0x1000>;
> clocks = <&sys_clk>;
> };
>
> uart1: uart@10000000 {
> compatible = "ns16550a";
> reg = <0x10001000 0x1000>;
> clocks = <&sys_clk>;
> };
>
> This removes the need for the frequency information to be duplicated in
> multiple nodes and allows the device tree to be more descriptive of the
> system.
>
> Signed-off-by: Paul Burton <paul.bur...@imgtec.com>
> ---
>
> drivers/serial/ns16550.c | 14 +++++++++++---
> 1 file changed, 11 insertions(+), 3 deletions(-)
Looks reasonable - but see below.
>
> diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c
> index 88fca15..53032dc 100644
> --- a/drivers/serial/ns16550.c
> +++ b/drivers/serial/ns16550.c
> @@ -5,6 +5,7 @@
> */
>
> #include <common.h>
> +#include <clk.h>
> #include <dm.h>
> #include <errno.h>
> #include <fdtdec.h>
> @@ -352,6 +353,8 @@ int ns16550_serial_ofdata_to_platdata(struct udevice *dev)
> {
> struct ns16550_platdata *plat = dev->platdata;
> fdt_addr_t addr;
> + struct clk clk;
> + int err;
>
> /* try Processor Local Bus device first */
> addr = dev_get_addr(dev);
> @@ -397,9 +400,14 @@ int ns16550_serial_ofdata_to_platdata(struct udevice
> *dev)
> "reg-offset", 0);
> plat->reg_shift = fdtdec_get_int(gd->fdt_blob, dev->of_offset,
> "reg-shift", 0);
> - plat->clock = fdtdec_get_int(gd->fdt_blob, dev->of_offset,
> - "clock-frequency",
> - CONFIG_SYS_NS16550_CLK);
> +
> + err = clk_get_by_index(dev, 0, &clk);
> + if (!err)
> + plat->clock = clk_get_rate(&clk);
I think this should ignore -ENODEV perhaps (no clock device) but not
any other error.
> + if (!plat->clock)
> + plat->clock = fdtdec_get_int(gd->fdt_blob, dev->of_offset,
> + "clock-frequency",
> + CONFIG_SYS_NS16550_CLK);
> if (!plat->clock) {
> debug("ns16550 clock not defined\n");
> return -EINVAL;
> --
> 2.9.0
>
Regards,
Simon
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
