Hi Michal, On Wed, Jul 13, 2016 at 08:28:44AM +0200, Michal Simek wrote: > On 8.7.2016 17:42, Max Filippov wrote: > > Introduce MDIO communication routines. Scan MDIO bus at reset to find > > attached PHYs and see if they support gigabit speeds. If they do check > > their gigabit control register: if gigabit autonegotiation is enabled > > clear it and reset the PHY. > > > > This allows using OpenCores 10/100 MAC with gigabit PHY connected to > > gigabit network. > > > > Signed-off-by: Max Filippov <jcmvb...@gmail.com> > > This looks kind of weird. If you have standard phy and you do it > properly in the driver you shouldn't do it in this way. > We have the same stuff for emaclite where IP can work only at 10/100 and > it can be used with 1G phy. Just look at setting there.
Ok, let me look at that. -- Thanks. -- Max _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
