Hi Tim, On 17/06/2016 15:01, Tim Harvey wrote: > This series addresses some stability issues related to voltage rails on > the IMX6 based Gateworks Ventana product family. > > Tim Harvey (5): > imx: mx6: export the set_ldo_voltage function > imx: ventana: fix PMIC rail adjustments for IMX6SDL in ldo-bypass mode > pmic: ltc3676: add regulator config function > imx: ventana: use continuous PWM mode and 1MHz for LTC3676 PMIC > regulators > imx: ventana: enable ldo-bypass mode on compatible kernels if > ldobypass env set > > arch/arm/cpu/armv7/mx6/soc.c | 8 +- > arch/arm/include/asm/arch-mx6/sys_proto.h | 9 ++ > board/gateworks/gw_ventana/common.c | 109 +++++++++++++++------ > board/gateworks/gw_ventana/common.h | 3 +- > board/gateworks/gw_ventana/gw_ventana.c | 152 > +++++++++++++++++++++++++++++- > drivers/power/pmic/pmic_ltc3676.c | 16 ++++ > include/power/ltc3676_pmic.h | 40 ++++++++ > 7 files changed, 301 insertions(+), 36 deletions(-) >
I do not find in my emailer 5/5 - I grab 0/5 for the answer. Patch 4/5 is like a trick, but I am asking if the same solution can be used on other boards. The issue looks to me quite general, and if ldo-bypass must be set depends on if there is a capable PMIC. What about to let this code become more general moving into imx-common ? Do you see any issue why we shouldn't ? Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de ===================================================================== _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
