This is needed to support driver-model conversion of USB and block devices.
Signed-off-by: Simon Glass <s...@chromium.org>
---
arch/arm/cpu/armv8/zynqmp/Kconfig | 4 ++++
arch/arm/mach-zynq/Kconfig | 3 +++
2 files changed, 7 insertions(+)
diff --git a/arch/arm/cpu/armv8/zynqmp/Kconfig
b/arch/arm/cpu/armv8/zynqmp/Kconfig
index 6c71d78..ed3305d 100644
--- a/arch/arm/cpu/armv8/zynqmp/Kconfig
+++ b/arch/arm/cpu/armv8/zynqmp/Kconfig
@@ -20,4 +20,8 @@ config SYS_CONFIG_NAME
config ZYNQMP_USB
bool "Configure ZynqMP USB"
+config SYS_MALLOC_F_LEN
+ default 0x600
+
+
endif
diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig
index db3c579..a982320 100644
--- a/arch/arm/mach-zynq/Kconfig
+++ b/arch/arm/mach-zynq/Kconfig
@@ -17,4 +17,7 @@ config SYS_CONFIG_NAME
Based on this option include/configs/<CONFIG_SYS_CONFIG_NAME>.h header
will be used for board configuration.
+config SYS_MALLOC_F_LEN
+ default 0x600
+
endif
--
2.8.0.rc3.226.g39d4020
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
