Hi George, On Fri, Jun 10, 2016 at 9:46 PM, George McCollister <george.mccollis...@gmail.com> wrote: > On Fri, Jun 10, 2016 at 8:29 AM, vinoth eswaran <evinoth1...@gmail.com> wrote: >> On Fri, Jun 10, 2016 at 2:53 PM, George McCollister >> <george.mccollis...@gmail.com> wrote: >>> On Thu, Jun 9, 2016 at 11:01 PM, Bin Meng <bmeng...@gmail.com> wrote: >>>> Hi, >>>> >>>> +Simon, ML and Stefan. >>>> >>>> On Wed, Jun 8, 2016 at 11:58 PM, vinoth eswaran <evinoth1...@gmail.com> >>>> wrote: >>>>> Hello Bin, >>>>> >>>>> Sorry that I don't know how not to reply without top-posting. I >>>>> don't know which settings to change, google didn't help me in this >>>>> case. >>>>> >>>> >>>> It's a posting style. See https://en.wikipedia.org/wiki/Posting_style. >>>> We use bottom-posting. >>>> >>>>> I have tested your patch on my target and found out that now mounting >>>>> root file system by sd card is fine. Thanks a lot :) >>>>> >>>> >>>> Great! >>>> >>>>> Now I am seeing another issue , the USB3.0 port (bottom) is not >>>>> working. I am sure that both ports are working fine with UEFI >>>>> Firmware. I tested by connecting a mouse to the USB port , in the >>>>> USB2.0 port (upper) it is working fine but in the USB3.0 port the >>>>> mouse is not getting detected. I am not sure why it is happening. I >>>>> looked into the kernel logs but I didn't get any error/debug messages. >>>>> Can you please check this on your board also. >>>>> >>>> >>>> Do you mean xHCI is not working under U-Boot? xHCI is not enabled in >>>> U-Boot yet. IIRC, U-Boot's xHCI driver does not support Intel >>>> controller yet. >>> I think he just means the bottom port isn't working. I had a patch set >>> to fix the problem but I never had time re-work the first patch in the >>> series. >>> http://lists.denx.de/pipermail/u-boot/2015-October/229469.html >>> >> Ya that's exactly is the problem. I will try to use the patch , but I >> am seeing many updates on the 'intel_ich6_gpio.c' which is hard to >> understand for me. > > You probably won't have much luck getting the patch to apply, but at > least it gives you an idea of what is going on and how to possibly fix > it.
Would you please re-work the patch if you have time? [snip] Regards, Bin _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
