This provides a way to load a FIT containing U-Boot and a selection of device
tree files from a File system. Making sure that all the reads and writes
are aligned to their respective needs.
Tested-by: Michal Simek <michal.si...@xilinx.com>
Reviewed-by: Simon Glass <s...@chromium.org>
Reviewed-by: Tom Rini <tr...@konsulko.com>
Signed-off-by: Lokesh Vutla <lokeshvu...@ti.com>
---
common/spl/spl_fit.c | 76 +++++++++++++++++++++++++++++++++++++++++-----------
common/spl/spl_mmc.c | 1 +
include/spl.h | 12 +++++++++
3 files changed, 74 insertions(+), 15 deletions(-)
diff --git a/common/spl/spl_fit.c b/common/spl/spl_fit.c
index e5c7ea2..fc03a6b 100644
--- a/common/spl/spl_fit.c
+++ b/common/spl/spl_fit.c
@@ -87,6 +87,42 @@ static int spl_fit_select_fdt(const void *fdt, int images,
int *fdt_offsetp)
return -ENOENT;
}
+static int get_aligned_image_offset(struct spl_load_info *info, int offset)
+{
+ /*
+ * If it is a FS read, get the first address before offset which is
+ * aligned to ARCH_DMA_MINALIGN. If it is raw read return the
+ * block number to which offset belongs.
+ */
+ if (info->filename)
+ return offset & ~(ARCH_DMA_MINALIGN - 1);
+
+ return offset / info->bl_len;
+}
+
+static int get_aligned_image_overhead(struct spl_load_info *info, int offset)
+{
+ /*
+ * If it is a FS read, get the difference between the offset and
+ * the first address before offset which is aligned to
+ * ARCH_DMA_MINALIGN. If it is raw read return the offset within the
+ * block.
+ */
+ if (info->filename)
+ return offset & (ARCH_DMA_MINALIGN - 1);
+
+ return offset % info->bl_len;
+}
+
+static int get_aligned_image_size(struct spl_load_info *info, int data_size,
+ int offset)
+{
+ if (info->filename)
+ return data_size + get_aligned_image_overhead(info, offset);
+
+ return (data_size + info->bl_len - 1) / info->bl_len;
+}
+
int spl_load_simple_fit(struct spl_load_info *info, ulong sector, void *fit)
{
int sectors;
@@ -96,7 +132,7 @@ int spl_load_simple_fit(struct spl_load_info *info, ulong
sector, void *fit)
void *load_ptr;
int fdt_offset, fdt_len;
int data_offset, data_size;
- int base_offset;
+ int base_offset, align_len;
int src_sector;
void *dst;
@@ -122,8 +158,10 @@ int spl_load_simple_fit(struct spl_load_info *info, ulong
sector, void *fit)
* In fact the FIT has its own load address, but we assume it cannot
* be before CONFIG_SYS_TEXT_BASE.
*/
- fit = (void *)(CONFIG_SYS_TEXT_BASE - size - info->bl_len);
- sectors = (size + info->bl_len - 1) / info->bl_len;
+ align_len = ARCH_DMA_MINALIGN - 1;
+ fit = (void *)((CONFIG_SYS_TEXT_BASE - size - info->bl_len -
+ align_len) & ~align_len);
+ sectors = get_aligned_image_size(info, size, 0);
count = info->read(info, sector, sectors, fit);
debug("fit read sector %lx, sectors=%d, dst=%p, count=%lu\n",
sector, sectors, fit, count);
@@ -156,19 +194,23 @@ int spl_load_simple_fit(struct spl_load_info *info, ulong
sector, void *fit)
* byte will be at 'load'. This may mean we need to load it starting
* before then, since we can only read whole blocks.
*/
- sectors = (data_size + info->bl_len - 1) / info->bl_len;
data_offset += base_offset;
+ sectors = get_aligned_image_size(info, data_size, data_offset);
load_ptr = (void *)load;
debug("U-Boot size %x, data %p\n", data_size, load_ptr);
- dst = load_ptr - (data_offset % info->bl_len);
+ dst = load_ptr;
/* Read the image */
- src_sector = sector + data_offset / info->bl_len;
- debug("image: data_offset=%x, dst=%p, src_sector=%x, sectors=%x\n",
- data_offset, dst, src_sector, sectors);
+ src_sector = sector + get_aligned_image_offset(info, data_offset);
+ debug("Aligned image read: dst=%p, src_sector=%x, sectors=%x\n",
+ dst, src_sector, sectors);
count = info->read(info, src_sector, sectors, dst);
if (count != sectors)
return -EIO;
+ debug("image: dst=%p, data_offset=%x, size=%x\n", dst, data_offset,
+ data_size);
+ memcpy(dst, dst + get_aligned_image_overhead(info, data_offset),
+ data_size);
/* Figure out which device tree the board wants to use */
fdt_len = spl_fit_select_fdt(fit, images, &fdt_offset);
@@ -178,14 +220,15 @@ int spl_load_simple_fit(struct spl_load_info *info, ulong
sector, void *fit)
/*
* Read the device tree and place it after the image. There may be
* some extra data before it since we can only read entire blocks.
+ * And also align the destination address to ARCH_DMA_MINALIGN.
*/
- dst = load_ptr + data_size;
+ dst = (void *)((load + data_size + align_len) & ~align_len);
fdt_offset += base_offset;
- sectors = (fdt_len + info->bl_len - 1) / info->bl_len;
- count = info->read(info, sector + fdt_offset / info->bl_len, sectors,
- dst);
- debug("fit read %x sectors to %x, dst %p, data_offset %x\n",
- sectors, spl_image.load_addr, dst, fdt_offset);
+ sectors = get_aligned_image_size(info, fdt_len, fdt_offset);
+ src_sector = sector + get_aligned_image_offset(info, fdt_offset);
+ count = info->read(info, src_sector, sectors, dst);
+ debug("Aligned fdt read: dst %p, src_sector = %x, sectors %x\n",
+ dst, src_sector, sectors);
if (count != sectors)
return -EIO;
@@ -194,7 +237,10 @@ int spl_load_simple_fit(struct spl_load_info *info, ulong
sector, void *fit)
* After this we will have the U-Boot image and its device tree ready
* for us to start.
*/
- memcpy(dst, dst + fdt_offset % info->bl_len, fdt_len);
+ debug("fdt: dst=%p, data_offset=%x, size=%x\n", dst, fdt_offset,
+ fdt_len);
+ memcpy(load_ptr + data_size,
+ dst + get_aligned_image_overhead(info, fdt_offset), fdt_len);
return 0;
}
diff --git a/common/spl/spl_mmc.c b/common/spl/spl_mmc.c
index 5676acd..d8058d6 100644
--- a/common/spl/spl_mmc.c
+++ b/common/spl/spl_mmc.c
@@ -77,6 +77,7 @@ static int mmc_load_image_raw_sector(struct mmc *mmc,
unsigned long sector)
debug("Found FIT\n");
load.dev = mmc;
load.priv = NULL;
+ load.filename = NULL;
load.bl_len = mmc->read_bl_len;
load.read = h_spl_load_read;
ret = spl_load_simple_fit(&load, sector, header);
diff --git a/include/spl.h b/include/spl.h
index 7edfab4..1128971 100644
--- a/include/spl.h
+++ b/include/spl.h
@@ -35,16 +35,28 @@ struct spl_image_info {
* @dev: Pointer to the device, e.g. struct mmc *
* @priv: Private data for the device
* @bl_len: Block length for reading in bytes
+ * @filename: Name of the fit image file.
* @read: Function to call to read from the device
*/
struct spl_load_info {
void *dev;
void *priv;
int bl_len;
+ const char *filename;
ulong (*read)(struct spl_load_info *load, ulong sector, ulong count,
void *buf);
};
+/**
+ * spl_load_simple_fit() - Loads a fit image from a device.
+ * @info: Structure containing the information required to load data.
+ * @sector: Sector number where FIT image is located in the device
+ * @fdt: Pointer to the copied FIT header.
+ *
+ * Reads the FIT image @sector in the device. Loads u-boot image to
+ * specified load address and copies the dtb to end of u-boot image.
+ * Returns 0 on success.
+ */
int spl_load_simple_fit(struct spl_load_info *info, ulong sector, void *fdt);
#define SPL_COPY_PAYLOAD_ONLY 1
--
2.8.2
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
