Dear "kevin.morf...@fearnside-systems.co.uk", In message <4aa583ac.3050...@fearnside-systems.co.uk> you wrote: > > > In message <4aa284b9.8030...@fearnside-systems.co.uk> you wrote: > >> This sets CONFIG_SYS_HZ to 1000 for all boards that use the s3c2400 and > >> s3c2410 cpu's which fixes various problems such as the timeouts in tftp > >> being > >> too short. > > > > I still wonder if this is really an issue. Some s3c2400 based boards > > have been in production use for several years, with volumes of many > > thousands of devices per year. Yet no TFTP timeout issues have been > > reported ever. ... > I think there were no problems because CONFIG_SYS_HZ was set to values that > worked for each of the s3c24x0 boards. I only submitted the patch because my
I'm confused - above you write "various problems such as the timeouts in tftp being too short", now you write: "there were no problems". Which one is correct? > I'm happy to withdraw the patch if it's OK to set CONFIG_SYS_HZ to a different > value than 1000? CONFIG_SYS_HZ is a constant with the value 1000. Board that use different values shall be fixed. Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de Severe culture shock results when experts from another protocol suite [...] try to read OSI documents. The term "osified" is used to refer to such documents. [...] Any relationship to the word "ossified" is purely intentional. - Marshall T. Rose _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
