On 05/22/2016 05:59 AM, Wills Wang wrote:
> This patch enable network function for ap121 board, it's based on
> the coming ethernet driver ag7xxx.
>
> Signed-off-by: Wills Wang <wills.w...@live.com>
> ---
Acked-by: Marek Vasut <ma...@denx.de>
> arch/mips/dts/ap121.dts | 5 +++++
> arch/mips/dts/ar933x.dtsi | 4 ++--
> board/qca/ap121/ap121.c | 2 ++
> configs/ap121_defconfig | 9 +++++++--
> 4 files changed, 16 insertions(+), 4 deletions(-)
>
> diff --git a/arch/mips/dts/ap121.dts b/arch/mips/dts/ap121.dts
> index e31f601..a934a58 100644
> --- a/arch/mips/dts/ap121.dts
> +++ b/arch/mips/dts/ap121.dts
> @@ -41,3 +41,8 @@
> reg = <0>;
> };
> };
> +
> +&gmac0 {
> + phy-mode = "rmii";
> + status = "okay";
> +};
> diff --git a/arch/mips/dts/ar933x.dtsi b/arch/mips/dts/ar933x.dtsi
> index 00896b2..971f13e 100644
> --- a/arch/mips/dts/ar933x.dtsi
> +++ b/arch/mips/dts/ar933x.dtsi
> @@ -75,7 +75,7 @@
> };
>
> gmac0: eth@0x19000000 {
> - compatible = "qca,ag7240-mac";
> + compatible = "qca,ag933x-mac";
> reg = <0x19000000 0x200>;
> phy = <&phy0>;
> phy-mode = "rmii";
> @@ -92,7 +92,7 @@
> };
>
> gmac1: eth@0x1a000000 {
> - compatible = "qca,ag7240-mac";
> + compatible = "qca,ag933x-mac";
> reg = <0x1a000000 0x200>;
> phy = <&phy0>;
> phy-mode = "rgmii";
> diff --git a/board/qca/ap121/ap121.c b/board/qca/ap121/ap121.c
> index b0e1993..7b5a4ac 100644
> --- a/board/qca/ap121/ap121.c
> +++ b/board/qca/ap121/ap121.c
> @@ -45,6 +45,8 @@ int board_early_init_f(void)
> #ifdef CONFIG_DEBUG_UART
> debug_uart_init();
> #endif
> +
> ddr_init(400, 400, 200);
> + ath79_eth_reset();
> return 0;
> }
> diff --git a/configs/ap121_defconfig b/configs/ap121_defconfig
> index 7604e2e..91fa734 100644
> --- a/configs/ap121_defconfig
> +++ b/configs/ap121_defconfig
> @@ -19,8 +19,13 @@ CONFIG_SYS_PROMPT="ap121 # "
> CONFIG_CMD_SF=y
> CONFIG_CMD_SPI=y
> # CONFIG_CMD_FPGA is not set
> -# CONFIG_CMD_NET is not set
> -# CONFIG_CMD_NFS is not set
> +CONFIG_CMD_NET=y
> +CONFIG_CMD_NFS=y
> +CONFIG_CMD_DHCP=y
> +CONFIG_CMD_PING=y
> +CONFIG_NET_RANDOM_ETHADDR=y
> +CONFIG_DM_ETH=y
> +CONFIG_AG7XXX=y
> CONFIG_SPI_FLASH=y
> CONFIG_SPI_FLASH_BAR=y
> CONFIG_SPI_FLASH_ATMEL=y
>
--
Best regards,
Marek Vasut
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
