This patch enable network function for ap121 board, it's based on
the coming ethernet driver ag7xxx.
Signed-off-by: Wills Wang <wills.w...@live.com>
---
arch/mips/dts/ap121.dts | 5 +++++
arch/mips/dts/ar933x.dtsi | 4 ++--
board/qca/ap121/ap121.c | 2 ++
configs/ap121_defconfig | 9 +++++++--
4 files changed, 16 insertions(+), 4 deletions(-)
diff --git a/arch/mips/dts/ap121.dts b/arch/mips/dts/ap121.dts
index e31f601..a934a58 100644
--- a/arch/mips/dts/ap121.dts
+++ b/arch/mips/dts/ap121.dts
@@ -41,3 +41,8 @@
reg = <0>;
};
};
+
+&gmac0 {
+ phy-mode = "rmii";
+ status = "okay";
+};
diff --git a/arch/mips/dts/ar933x.dtsi b/arch/mips/dts/ar933x.dtsi
index 00896b2..971f13e 100644
--- a/arch/mips/dts/ar933x.dtsi
+++ b/arch/mips/dts/ar933x.dtsi
@@ -75,7 +75,7 @@
};
gmac0: eth@0x19000000 {
- compatible = "qca,ag7240-mac";
+ compatible = "qca,ag933x-mac";
reg = <0x19000000 0x200>;
phy = <&phy0>;
phy-mode = "rmii";
@@ -92,7 +92,7 @@
};
gmac1: eth@0x1a000000 {
- compatible = "qca,ag7240-mac";
+ compatible = "qca,ag933x-mac";
reg = <0x1a000000 0x200>;
phy = <&phy0>;
phy-mode = "rgmii";
diff --git a/board/qca/ap121/ap121.c b/board/qca/ap121/ap121.c
index b0e1993..7b5a4ac 100644
--- a/board/qca/ap121/ap121.c
+++ b/board/qca/ap121/ap121.c
@@ -45,6 +45,8 @@ int board_early_init_f(void)
#ifdef CONFIG_DEBUG_UART
debug_uart_init();
#endif
+
ddr_init(400, 400, 200);
+ ath79_eth_reset();
return 0;
}
diff --git a/configs/ap121_defconfig b/configs/ap121_defconfig
index 7604e2e..91fa734 100644
--- a/configs/ap121_defconfig
+++ b/configs/ap121_defconfig
@@ -19,8 +19,13 @@ CONFIG_SYS_PROMPT="ap121 # "
CONFIG_CMD_SF=y
CONFIG_CMD_SPI=y
# CONFIG_CMD_FPGA is not set
-# CONFIG_CMD_NET is not set
-# CONFIG_CMD_NFS is not set
+CONFIG_CMD_NET=y
+CONFIG_CMD_NFS=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_PING=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DM_ETH=y
+CONFIG_AG7XXX=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_BAR=y
CONFIG_SPI_FLASH_ATMEL=y
--
1.9.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
