Thanks for your answer. I tried this before i posted the question, and it didn't work.
Do you know the exact address of the U-Boot on the NAND? Is there an additional header before the U-Boot? Alex Daniel Gorsulowski wrote: > > alex889 wrote: >> Hi, >> I'm working on the DM365evm, >> and i was wondering if there is a way to burn new U-Boot version over >> network, instead of Code Composer and a JTAG? >> >> Thanks, >> Alex > > Hi Alex, > > of course it's possible! > But it depends on the location of your U-Boot. > > I.e. your U-Boot is located in dataflash or NAND flash: > > tftp $(loadaddress) $(img) > protect off $(start) $(end) > erase $(start) $(end) > cp.b $(loadaddress) $(start) $(filesize) > > $(loadaddress) - the temporary RAM address for downloading new U-Boot > $(img) - the path to your new U-Boot image (i.e. > /tftpboot/update/u-boot.img) > $(start) - the flash address, where U-Boot is located > $(end) - $(start) + maximum size of U-Boot (erasesize) > $(filesize) - set automatically after tftp transfer > > Regards > Daniel > > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot > > -- View this message in context: http://www.nabble.com/-U-Boot--How-to-burn-new-U-Boot-over-network-tp25327003p25329639.html Sent from the Uboot - Users mailing list archive at Nabble.com. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
