Default address parity is disabled for DDR4 UDIMM for considing
performance, it needs to enable parity for A-009803 workaround.

Signed-off-by: Shengzhou Liu <shengzhou....@nxp.com>
---
 drivers/ddr/fsl/options.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/ddr/fsl/options.c b/drivers/ddr/fsl/options.c
index d0075ff..dcef0bb 100644
--- a/drivers/ddr/fsl/options.c
+++ b/drivers/ddr/fsl/options.c
@@ -1016,6 +1016,9 @@ unsigned int populate_memctl_options(const 
common_timing_params_t *common_dimm,
                }
        }
 
+#ifdef CONFIG_SYS_FSL_ERRATUM_A009803
+       popts->ap_en = 1;
+#endif
        /*
         * BSTTOPRE precharge interval
         *
-- 
2.1.0.27.g96db324

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to