On Fri, Sep 04, 2009 at 07:38:15PM +0200, Konrad Mattheis wrote : > >> Hi, > >> > >> I have a AT91SAM9G20 and try to boot from SD-Card. > >> I compiled u-boot, but the CONFIG_MMC is missing in the default mode. > >> I found the default config for this board in > >> /include/config/at91sam9260ek.h there I added the follofing lines: > >> > >> #define CONFIG_CMD_MMC 1 > >> #define CONFIG_MMC 1 > >> > >> now I get a compiler error with: > >> > >> /common/cmd_mmc.c:53: undefined reference to `mmc_legacy_init',..... > >> > >> Any ideas? > > >You need an actual SD/MMC driver. Here, the driver is atmel_mci, and you > >need #define CONFIG_ATMEL_MCI in your board >config.h > > >Please note, though, that using the MCI driver on AT91 is not yet supported > >in mainline. > > What does is mean, not yet. Do you have a plan to support this. Or is this a > dead-end street?
As per the thread I pointed[1] out to you, there is an actual plan to support it, as the first mail suggests. That's a patch which implements such support, and is currently pending review... Please note that the atmel_mci is currently buggy for little-endian architectures (that is, at91), and needs fixing in that regard. One way to fix this was posted by Sami Kantoluoto in the first mail on [2], and a second way, as explained in the first reply to [2] [1] http://lists.denx.de/pipermail/u-boot/2009-September/059665.html [2] http://lists.denx.de/pipermail/u-boot/2009-August/059595.html Regards, -- Albin Tonnerre, Free Electrons Kernel, drivers and embedded Linux development, consulting, training and support. http://free-electrons.com
signature.asc
Description: Digital signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
