On Fri, Sep 04, 2009 at 12:08:26PM +0200, Konrad Mattheis wrote : > Hi, > > I have a AT91SAM9G20 and try to boot from SD-Card. > I compiled u-boot, but the CONFIG_MMC is missing in the default mode. > I found the default config for this board in /include/config/at91sam9260ek.h > there I added the follofing lines: > > #define CONFIG_CMD_MMC 1 > #define CONFIG_MMC 1 > > now I get a compiler error with: > > /common/cmd_mmc.c:53: undefined reference to `mmc_legacy_init',..... > > Any ideas?
You need an actual SD/MMC driver. Here, the driver is atmel_mci, and you need #define CONFIG_ATMEL_MCI in your board config.h Please note, though, that using the MCI driver on AT91 is not yet supported in mainline. In particular, please see the threads starting here for further information: http://lists.denx.de/pipermail/u-boot/2009-August/059595.html http://lists.denx.de/pipermail/u-boot/2009-September/059665.html Regards, -- Albin Tonnerre, Free Electrons Kernel, drivers and embedded Linux development, consulting, training and support. http://free-electrons.com
signature.asc
Description: Digital signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
