On 04/21/2016 03:17 PM, Heiko Schocher wrote: > Hello Marek, > > Am 21.04.2016 um 14:51 schrieb Marek Vasut: >> On 04/21/2016 02:48 PM, Heiko Schocher wrote: >>> suppress a lot of >>> "reg or ranges property, but no unit name" warnings, >>> through the dtc compiler flag "-Wno-unit_address_vs_reg". >>> >>> If all DTS are fixed, we can remove this flag again. >>> >>> Signed-off-by: Heiko Schocher <h...@denx.de> >>> --- >>> There is also a solution to suppress warnings from >>> the dtc compiler by the "-q" flag, but that would >>> suppress all warnings. Not realy what I want. >> >> Yep >> >>> With this patch and patch: >>> http://patchwork.ozlabs.org/patch/609150/ >>> >>> travis build passes, see: >>> https://travis-ci.org/hsdenx/u-boot/builds/124723016 >>> >>> >>> arch/arc/dts/Makefile | 2 ++ >>> arch/arm/dts/Makefile | 3 ++- >>> arch/microblaze/dts/Makefile | 2 ++ >>> arch/mips/dts/Makefile | 3 ++- >>> arch/nios2/dts/Makefile | 2 ++ >>> arch/powerpc/dts/Makefile | 2 ++ >>> arch/sandbox/dts/Makefile | 2 ++ >>> arch/x86/dts/Makefile | 2 ++ >>> 8 files changed, 16 insertions(+), 2 deletions(-) >> >> Isn't there some common place in scripts/ or so where we can disable >> this warning using an one-liner ? > > I don;t know ... but I prefer to disable this per arch .. so we can > enable the check back if one arch is fixed ...
In my opinion, we should stick to the same behavior Linux does. Ccing a few more people. -- Best regards, Marek Vasut _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
