On 16:04 Thu 20 Aug , Albin Tonnerre wrote: > The Calao TNY-A9260 and TNY-9G20 are boards manufactured and sold by > Calao Systems <http://www.calao-systems.com>. Their components are very > similar to the AT91SAM9260EK board, so their configuration is based on > the configuration of this board. There are however some differences: > different clocks, no LCD, no ethernet. They also can use SPI EEPROM to > store the environment. > > Signed-off-by: Albin Tonnerre <albin.tonne...@free-electrons.com> > --- > Changes in v7: > - As per Jean-Christophe's commentes, fix long lines and use uppercase for > defines in include/configs/tny_a9260.h. Slightly rework the ifdef logic in > the process > - Add an entry in MAINTAINERS for the tny_a9g20 as weel, since both 9260 and > 9g20 are supported > > Changes in v8: > - Update MAKEALL to reflect the changes in Makefile, and add the tny_a9g20 > > MAINTAINERS | 5 + > MAKEALL | 2 + > Makefile | 10 ++ > board/calao/tny_a9260/Makefile | 55 ++++++++++ > board/calao/tny_a9260/config.mk | 1 + > board/calao/tny_a9260/spi.c | 50 +++++++++ > board/calao/tny_a9260/tny_a9260.c | 110 +++++++++++++++++++ > cpu/arm926ejs/at91/at91sam9260_devices.c | 2 +- > include/configs/tny_a9260.h | 172 > ++++++++++++++++++++++++++++++ > 9 files changed, 406 insertions(+), 1 deletions(-) > create mode 100644 board/calao/tny_a9260/Makefile > create mode 100644 board/calao/tny_a9260/config.mk > create mode 100644 board/calao/tny_a9260/spi.c > create mode 100644 board/calao/tny_a9260/tny_a9260.c > create mode 100644 include/configs/tny_a9260.h > applied to u-boot-arm
but merged manually please next time when you add different board does it as a patch series to avoid the manual merge Best Regards, J. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
