On 9.4.2016 20:36, Simon Glass wrote: > Hi Michal, > > On 6 April 2016 at 12:28, Michal Simek <michal.si...@xilinx.com> wrote: >> Create CMD_FDT Kconfig entry to have an option to disable fdt command >> which is not required for small configuration which requires libfdt >> only. >> Enable it by default for all targets which enables OF_LIBFDT. >> >> Signed-off-by: Michal Simek <michal.si...@xilinx.com> >> --- >> >> Changes in v2: None >> >> cmd/Kconfig | 7 +++++++ >> cmd/Makefile | 2 +- >> 2 files changed, 8 insertions(+), 1 deletion(-) >> >> diff --git a/cmd/Kconfig b/cmd/Kconfig >> index fe8b4f0510da..8703cdb4a9be 100644 >> --- a/cmd/Kconfig >> +++ b/cmd/Kconfig >> @@ -173,6 +173,13 @@ config CMD_ELF >> help >> Boot an ELF/vxWorks image from the memory. >> >> +config CMD_FDT >> + bool "Flattened Device Tree utility commands" >> + default y >> + depends on OF_LIBFDT >> + help >> + Do FDT related setup before booting into the Operating System. >> + >> config CMD_GO >> bool "go" >> default y >> diff --git a/cmd/Makefile b/cmd/Makefile >> index ba041973079c..f95759e67044 100644 >> --- a/cmd/Makefile >> +++ b/cmd/Makefile >> @@ -54,7 +54,7 @@ obj-$(CONFIG_CMD_EXT4) += ext4.o >> obj-$(CONFIG_CMD_EXT2) += ext2.o >> obj-$(CONFIG_CMD_FAT) += fat.o >> obj-$(CONFIG_CMD_FDC) += fdc.o >> -obj-$(CONFIG_OF_LIBFDT) += fdt.o >> +obj-$(CONFIG_CMD_FDT) += fdt.o > > Won't this disable the command for lots of boards?
Also based on Masahiro response boards shouldn't be affected. Only that 6 boards needs to be fixed which is what I have done in 1/2. http://lists.denx.de/pipermail/u-boot/2016-April/250628.html Thanks, Michal _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot