Hi Michal, On 6 April 2016 at 12:28, Michal Simek <michal.si...@xilinx.com> wrote: > Create CMD_FDT Kconfig entry to have an option to disable fdt command > which is not required for small configuration which requires libfdt > only. > Enable it by default for all targets which enables OF_LIBFDT. > > Signed-off-by: Michal Simek <michal.si...@xilinx.com> > --- > > Changes in v2: None > > cmd/Kconfig | 7 +++++++ > cmd/Makefile | 2 +- > 2 files changed, 8 insertions(+), 1 deletion(-) > > diff --git a/cmd/Kconfig b/cmd/Kconfig > index fe8b4f0510da..8703cdb4a9be 100644 > --- a/cmd/Kconfig > +++ b/cmd/Kconfig > @@ -173,6 +173,13 @@ config CMD_ELF > help > Boot an ELF/vxWorks image from the memory. > > +config CMD_FDT > + bool "Flattened Device Tree utility commands" > + default y > + depends on OF_LIBFDT > + help > + Do FDT related setup before booting into the Operating System. > + > config CMD_GO > bool "go" > default y > diff --git a/cmd/Makefile b/cmd/Makefile > index ba041973079c..f95759e67044 100644 > --- a/cmd/Makefile > +++ b/cmd/Makefile > @@ -54,7 +54,7 @@ obj-$(CONFIG_CMD_EXT4) += ext4.o > obj-$(CONFIG_CMD_EXT2) += ext2.o > obj-$(CONFIG_CMD_FAT) += fat.o > obj-$(CONFIG_CMD_FDC) += fdc.o > -obj-$(CONFIG_OF_LIBFDT) += fdt.o > +obj-$(CONFIG_CMD_FDT) += fdt.o
Won't this disable the command for lots of boards? > obj-$(CONFIG_CMD_FITUPD) += fitupd.o > obj-$(CONFIG_CMD_FLASH) += flash.o > ifdef CONFIG_FPGA > -- > 1.9.1 > Regards, Simon _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
