On Thu, Apr 7, 2016 at 10:36 AM, Lukasz Majewski <l.majew...@samsung.com> wrote:
> Hi Steve,
>
>> No -- I do not believe that this issue is caused by different fastboot
>> (client) versions (the executable that runs on the host computer -
>> Linux, Windows, Mac, etc.)
>> I have personally attempted three (3) different versions, and the
>> results are consistent.
>>
>> And no I don't think that I "am the only hope at fixing this proper"
>> -- as you will see below,
>> this" issue" seems to be unique to the "TI platforms" (... nobody else
>> has stated they have an issue either way -- but I don't think many use
>> this feature ....)
>> So maybe someone with "TI platforms" could investigate this more
>> thoroughly...
>>
>> HISTORY:
>>
>> The U-Boot code, up to Feb 25, worked properly on my Broadcom boards
>> -- this code contains:
>> req->length = rx_bytes_expected();
>> if (req->length < ep->maxpacket)
>> req->length = ep->maxpacket;
>> which aligned the remaining "rx_bytes_expected" to be aligned to the
>> "ep->maxpacket" size.
>>
>> On Feb 25, there was a patch applied from <dileep.ka...@linaro.org>
>> which forces the remaining "rx_bytes_expected" to be aligned to the
>> "wMaxPacketSize" size -- this patch broke all Broadcom boards:
>> + if (rx_remain < maxpacket) {
>> + rx_remain = maxpacket;
>> + } else if (rx_remain % maxpacket != 0) {
>> + rem = rx_remain % maxpacket;
>> + rx_remain = rx_remain + (maxpacket - rem);
>> + }
>>
>> After attempting to unsuccessfully contact Dileep, I requested that
>> this patch be reverted -- because it broke my boards! (see the other
>> email thread).
>>
>> Sam Protsenko <semen.protse...@linaro.org> has stated that this Feb 25
>> change is required to make "fastboot work on TI platforms".
>>
>> Thus,
>> - Broadcom boards require alignment to "ep->maxpacket" size
>> - TI platforms require alignment to "wMaxPacketSize" size
>> And we seem to be at a stale-mate.
>> Unfortunately, I do not know enough about the USB internals to
>> understand why this change breaks the Broadcom boards; or why it _is_
>> required on the TI platforms....
>> ( Is there any debugging that can be turned on to validate what is
>> happening at the lower levels? )
>
> I can only speak about DWC2 (from Synopsis) embedded at Samsung boards.
> There are low level debugging registers (documented, but not supposed
> to be used at normal operation), which give you some impression
> regarding very low level events.
>
> DWC2 at Samsung is using those to work properly since we had some
> problems with dwc2 IP blocks implementation on early Samsung
> platforms :-). This approach works in u-boot up till now.
>
> Another option is to use JTAG debugger (like Lauterbach) to inspect
> state of this IP block.
>
>> ( Can anyone explain why "wMaxPacketSize" size would be required? --
>> my limited understanding of endpoints makes me think that
>> "ep->maxpacket" size is actually the correct value! )
>>
>> I asked Sam to submit a patch which conditionally applied the
>> alignment to "wMaxPacketSize" size change -- he stated that he was too
>> busy right now -- so I submitted this patch on his behalf (although he
>> still needs to add the Kconfig for the TI platforms in order to make
>> his boards work)....
>>
>> I suppose I could also propose a patch where the condition _removes_
>> this feature (and define it on the Broadcom boards) -- do we
>> generally like "negated" conditionals?
>> +#ifndef
>> CONFIG_USB_GADGET_FASTBOOT_DOWNLOAD_DISABLE_ALIGNMENT_WITH_WMAXPACKETSIZE
>> Please advise!
>>
>> Further, how does the U-Boot community respond to a change which
>> breaks something which is already working? Doesn't the "author" of
>> that change bear any responsibility on assisting to get "their" change
>> working properly with "all" the existing boards?
>
> As we know the author of this change is not working at Linaro anymore.
>
>> I'm getting the
>> impression that "because the current code works for me", that I am not
>> getting any assistance in resolving this issue -- which is why I
>> suggested "reverting" this change back to the original code; that way,
>> it would (politely?) force someone interested in "TI platforms" to
>> step up and look into this....
>>
>> Sorry for asking so many questions in one email -- but I'd appreciate
>> answers....
>> ( I also apologize in advance for the "attitude" which is leaking into
>> this email... )
>> Please tell me what I can do! I had working boards; now they are all
>> broken -- and I don't how how to get them working again....
>
> If you don't have enough time (and HW) for investigate the issue, I
> think that Kconfig option with documentation entry is the way to go.
>
> I hope that Sam don't have any objections with such approach.
>
If this commit doesn't break any platform -- I'm ok with that. If it
breaks anything (TI boards particularly) -- I'd ask to revert it at
once, as this is I believe not right way to do things.
So Steve, please add
CONFIG_USB_GADGET_FASTBOOT_DOWNLOAD_ALIGNMENT_REQUIRED option to all
required defconfigs (except yours), so that your patch only fixes your
platforms, but doesn't break any other platform at the same time. Also
good thing to do after that is check options order in changed
defconfigs with "make savedefconfig" rule. Both your current changes
and appropriate lines in defconfigs should be committed as a single
patch, so that it doesn't break anything and "git bisect" may be used
to look for regressions. Also, really nice thing to do after all of
this, is to use "./tools/buildman/buildman" tool to check all ARM
boards for regressions after your patch (you should see that only your
boards were changed).
Ideally, we should check it on all boards (or at least on all UDC
controllers supported in U-Boot) and figure out what is happening
exactly. But I'm totally fine with hack if it fixes real problem on
some platforms. I just ask you guys to not break anything else at the
same time (although it surely takes much more effort, but still).
>> Thanks, Steve
>>
>> On Wed, Apr 6, 2016 at 4:01 AM, Marek Vasut <ma...@denx.de> wrote:
>> > On 04/06/2016 07:35 AM, Steve Rae wrote:
>> >>
>> >> On Apr 5, 2016 3:07 PM, "Marek Vasut" <ma...@denx.de
>> >> <mailto:ma...@denx.de>> wrote:
>> >>>
>> >>> On 04/05/2016 08:31 PM, Steve Rae wrote:
>> >>> > commit 9e4b510 fastboot: OUT transaction length must be aligned
>> >>> > to
>> >> wMaxPacketSize
>> >>> > breaks some boards...
>> >>> >
>> >>> > Therefore add a conditional Kconfig to optionally enable this
>> >>> > feature.
>> >>>
>> >>> Did you drill into it to figure out why this is needed ?
>> >>>
>> >>
>> >> Marek,
>> >> Let me clarify....
>> >> All my boards work with the original code (before the commit which
>> >> aligned the size to the wMaxPacketSize).... Since that commit,
>> >> all my boards are broken.
>> >> And you will notice in this patch, that none of my boards define
>> >> this CONFIG_ ...
>> >>
>> >> So I think you are asking the wrong person to drill down into this
>> >> issue.... Sorry, Steve
>> >
>> > Well who else can I ask ? You're our only hope at fixing this
>> > proper.
>> >
>> > Anyway, see my other reply, maybe we should just add an arg to
>> > fastboot command to select one more of operation or the other and
>> > default to the one which works.
>> >
>> > --
>> > Best regards,
>> > Marek Vasut
>>
>
>
>
> --
> Best regards,
>
> Lukasz Majewski
>
> Samsung R&D Institute Poland (SRPOL) | Linux Platform Group
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
