On 6 April 2016 at 18:43, Peng Fan <van.free...@gmail.com> wrote: > On Wed, Apr 06, 2016 at 03:32:01PM +0530, Niti Gupta wrote: > > > >On 6 April 2016 at 14:33, Peng Fan <van.free...@gmail.com> wrote: > > > > Hi Niti, > > > > On Wed, Apr 06, 2016 at 01:39:31PM +0800, Bin Meng wrote: > > >On Wed, Apr 6, 2016 at 1:21 PM, Niti Gupta <gupta.nit...@gmail.com> > wrote: > > >> Hello Bin, > > >> > > >> I am trying to load Segger's embOS. > > >> > > > > > >Please avoid top-posting. > > > > > >I don't know this OS, but you can try 'bootelf' command if embOS > image > > >is an ELF image. If there is anything special, you need write your > own > > >boot command for the OS. > > > > Besids bootelf, you can directly using command "go", if your image is > > a bin file. > > > > Share my way to boot rtems on i.MX6UL. > > > > first load you os bin file to a dram address, saying 0x80008000, > > then > > dcache off > > icache off > > dcache flush > > icache flush > > go 0x80008000 > > > > Regards, > > Peng > > > > > >Hello Peng, > >I tried following commands in order to load os bin file > > > >"loadb 0x80008000 > >## Ready for binary (kermit) download to 0x80008000 at 115200 bps... > >## Total Size = 0x00018fac = 102316 Bytes > >## Start Addr = 0x80008000 > >=> dcache off > >=> icache off > >=> dcache flush > >=> icache flush > >=> go 0x8000800" > > why change 0x80008000 to 0x8000800 when go command? > > 0x80008000 is just an example in my side. You should know the entry > address of your embedded os if using bin file. > > Regards, > Peng. >
Hello Peng Thanks for reply. I am building my image using IAR and the sample project containing BSP for i.MUX6UL provided by embOS. It is a simple application to check CPU performance. After building this application Start_imxUL.bin is generated. I am trying to boot this image from sd card. I don't know how to check or detect entry point of this image. Kindly help me to figure this out. It will be a great help for me. Thanks, Niti > > > > >but it is showing following errors > > > >undefined instruction > >pc : [<00912a5c>] lr : [<9ff5882c>] > >reloc pc : [<e81bfa5c>] lr : [<8780582c>] > >sp : 9ef50d58 ip : e59ff018 fp : 9ef568b0 > >r10: 00000002 r9 : 9ef50eb8 r8 : 9ffa1d04 > >r7 : 9efd73a8 r6 : 6a0191a8 r5 : 00000002 r4 : 9efd73ac > >r3 : 80008abd r2 : 9efd73ac r1 : 9efd73ac r0 : 00000001 > >Flags: nZCv IRQs off FIQs off Mode SVC_32 > >Resetting CPU ... > > > >resetting ... > > > >I am using default u-boot for i.MUX6UL which is > "u-boot-imx6ulevk_sd.imx". Do > >I need to rebuild u-boot after some rework? > >Kindly help, I am completely stuck over here, failed to find appropriate > way to > >load RTOS from SD Card. > > > >Thanks, > >Niti Gupta > > > > > > > > > >> Thanks, > > >> Niti Gupta > > >> > > >> On 6 April 2016 at 07:18, Bin Meng <bmeng...@gmail.com> wrote: > > >>> > > >>> On Wed, Apr 6, 2016 at 3:07 AM, Niti Gupta < > gupta.nit...@gmail.com> > > wrote: > > >>> > Hello, > > >>> > > > >>> > > > >>> > I am working on embedded systems. I want to use u-boot to load > rtos > > on > > >>> > freescale i.MUX6UL board but failed to find appropriate way to > do > > >>> > this. Kindly help me to find out steps to load rtos from u-boot. > > >>> > > > >>> > > >>> What RTOS are you trying to load? > > > > > >Regards, > > >Bin > > >_______________________________________________ > > >U-Boot mailing list > > >U-Boot@lists.denx.de > > >http://lists.denx.de/mailman/listinfo/u-boot > > > > > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot