Hi Niti, On Wed, Apr 06, 2016 at 01:39:31PM +0800, Bin Meng wrote: >On Wed, Apr 6, 2016 at 1:21 PM, Niti Gupta <gupta.nit...@gmail.com> wrote: >> Hello Bin, >> >> I am trying to load Segger's embOS. >> > >Please avoid top-posting. > >I don't know this OS, but you can try 'bootelf' command if embOS image >is an ELF image. If there is anything special, you need write your own >boot command for the OS.
Besids bootelf, you can directly using command "go", if your image is a bin file. Share my way to boot rtems on i.MX6UL. first load you os bin file to a dram address, saying 0x80008000, then dcache off icache off dcache flush icache flush go 0x80008000 Regards, Peng > >> Thanks, >> Niti Gupta >> >> On 6 April 2016 at 07:18, Bin Meng <bmeng...@gmail.com> wrote: >>> >>> On Wed, Apr 6, 2016 at 3:07 AM, Niti Gupta <gupta.nit...@gmail.com> wrote: >>> > Hello, >>> > >>> > >>> > I am working on embedded systems. I want to use u-boot to load rtos on >>> > freescale i.MUX6UL board but failed to find appropriate way to do >>> > this. Kindly help me to find out steps to load rtos from u-boot. >>> > >>> >>> What RTOS are you trying to load? > >Regards, >Bin >_______________________________________________ >U-Boot mailing list >U-Boot@lists.denx.de >http://lists.denx.de/mailman/listinfo/u-boot _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
