On 03/23/2016 03:09 AM, York Sun wrote: > On 03/06/2016 11:56 PM, Yuan Yao wrote: > > From: Yuan Yao <yao.y...@nxp.com> > > > > This series add support for QSPI boot on LS2080AQDS. > > > > Yuan Yao (11): > > armv8: ls2080aqds: Select QSPI CLK div via SCFG > > configs: ls2080a_common: Remove duplicate NOR configs > > configs: ls2080aqds: disable IFC NOR & QIXIS when QSPI enable > > configs: ls2080aqds: Enable QSPI flash support > > dm: dts: ls2080aqds: Add QSPI dts node > > armv8: ls2080aqds: Config QSPI pin mux via FPGA in NAND boot > > configs: ls2080a: Increase load image len in NAND boot > > ls2080aqds_nand_defconfig: Enable QSPI & its dependence > > armv8: ls2080aqds: Enable QSPI boot support > > Changed in v2: > > merged the patch: > > 0009-armv8-ls2080aqds-Enable-QSPI-boot-support.patch > > 0010-ls2080aqds-Enable-support-for-boot-from-QSPI.patch > > 0012-LS2080QDS-QSPI-boot-fix-issues.patch > > in this patch. > > board/ls2080qds: add the procedure to deply QSPI image. > > New add in v2. > > freescale: cmd: qixis: tidy up the duplicated code > > > > arch/arm/dts/fsl-ls2080a-qds.dts | 14 +++++++ > > arch/arm/dts/fsl-ls2080a.dtsi | 10 +++++ > > arch/arm/include/asm/arch-fsl-layerscape/cpu.h | 4 ++ > > .../include/asm/arch-fsl-layerscape/immap_lsch3.h | 3 ++ > > board/freescale/common/qixis.c | 12 ++---- > > board/freescale/ls2080aqds/README | 35 ++++++++++++++++++ > > board/freescale/ls2080aqds/ls2080aqds.c | 16 ++++++++ > > common/board_f.c | 6 +-- > > configs/ls2080aqds_nand_defconfig | 9 +++++ > > configs/ls2080aqds_qspi_defconfig | 10 +++++ > > include/configs/ls2080a_common.h | 11 ++---- > > include/configs/ls2080a_simu.h | 7 ++++ > > include/configs/ls2080aqds.h | 43 > > +++++++++++++++++++++- > > 13 files changed, 159 insertions(+), 21 deletions(-) create mode > > 100644 configs/ls2080aqds_qspi_defconfig > > > > Yuan, > > This set was sent before Jagan's comment on your v1 patch. Please let me > know if you need to update your patches. >
Yes, I will update this patch set. But from some review and comments there is a lot of the changes for this patch set. So I need some time to confirm and test it. I will resend this patch set as soon as possible. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
