On 03/06/2016 11:56 PM, Yuan Yao wrote: > From: Yuan Yao <yao.y...@nxp.com> > > This series add support for QSPI boot on LS2080AQDS. > > Yuan Yao (11): > armv8: ls2080aqds: Select QSPI CLK div via SCFG > configs: ls2080a_common: Remove duplicate NOR configs > configs: ls2080aqds: disable IFC NOR & QIXIS when QSPI enable > configs: ls2080aqds: Enable QSPI flash support > dm: dts: ls2080aqds: Add QSPI dts node > armv8: ls2080aqds: Config QSPI pin mux via FPGA in NAND boot > configs: ls2080a: Increase load image len in NAND boot > ls2080aqds_nand_defconfig: Enable QSPI & its dependence > armv8: ls2080aqds: Enable QSPI boot support > Changed in v2: > merged the patch: > 0009-armv8-ls2080aqds-Enable-QSPI-boot-support.patch > 0010-ls2080aqds-Enable-support-for-boot-from-QSPI.patch > 0012-LS2080QDS-QSPI-boot-fix-issues.patch > in this patch. > board/ls2080qds: add the procedure to deply QSPI image. > New add in v2. > freescale: cmd: qixis: tidy up the duplicated code > > arch/arm/dts/fsl-ls2080a-qds.dts | 14 +++++++ > arch/arm/dts/fsl-ls2080a.dtsi | 10 +++++ > arch/arm/include/asm/arch-fsl-layerscape/cpu.h | 4 ++ > .../include/asm/arch-fsl-layerscape/immap_lsch3.h | 3 ++ > board/freescale/common/qixis.c | 12 ++---- > board/freescale/ls2080aqds/README | 35 ++++++++++++++++++ > board/freescale/ls2080aqds/ls2080aqds.c | 16 ++++++++ > common/board_f.c | 6 +-- > configs/ls2080aqds_nand_defconfig | 9 +++++ > configs/ls2080aqds_qspi_defconfig | 10 +++++ > include/configs/ls2080a_common.h | 11 ++---- > include/configs/ls2080a_simu.h | 7 ++++ > include/configs/ls2080aqds.h | 43 > +++++++++++++++++++++- > 13 files changed, 159 insertions(+), 21 deletions(-) > create mode 100644 configs/ls2080aqds_qspi_defconfig >
Yuan, This set was sent before Jagan's comment on your v1 patch. Please let me know if you need to update your patches. York _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
