Use opcode instead of cmd, for more readability.
Cc: Simon Glass <s...@chromium.org>
Cc: Bin Meng <bmeng...@gmail.com>
Cc: Mugunthan V N <mugunthan...@ti.com>
Cc: Michal Simek <michal.si...@xilinx.com>
Cc: Siva Durga Prasad Paladugu <siva...@xilinx.com>
Signed-off-by: Jagan Teki <jt...@openedev.com>
---
drivers/mtd/spi-nor/m25p80.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/mtd/spi-nor/m25p80.c b/drivers/mtd/spi-nor/m25p80.c
index c65534c..bdf54be 100644
--- a/drivers/mtd/spi-nor/m25p80.c
+++ b/drivers/mtd/spi-nor/m25p80.c
@@ -41,7 +41,7 @@ static int m25p_cmdsz(struct spi_nor *nor)
return 1 + nor->addr_width;
}
-static int m25p80_read_reg(struct spi_nor *nor, u8 cmd, u8 *val, int len)
+static int m25p80_read_reg(struct spi_nor *nor, u8 opcode, u8 *val, int len)
{
struct m25p *flash = nor->priv;
struct spi_slave *spi = flash->spi;
@@ -56,9 +56,9 @@ static int m25p80_read_reg(struct spi_nor *nor, u8 cmd, u8
*val, int len)
if (nor->flags & SNOR_F_U_PAGE)
spi->flags |= SPI_XFER_U_PAGE;
- ret = spi_write_then_read(spi, &cmd, 1, NULL, val, len);
+ ret = spi_write_then_read(spi, &opcode, 1, NULL, val, len);
if (ret < 0) {
- debug("m25p80: error %d reading register %x\n", ret, cmd);
+ debug("m25p80: error %d reading register %x\n", ret, opcode);
return ret;
}
@@ -67,7 +67,7 @@ static int m25p80_read_reg(struct spi_nor *nor, u8 cmd, u8
*val, int len)
return ret;
}
-static int m25p80_write_reg(struct spi_nor *nor, u8 cmd, u8 *buf, int len)
+static int m25p80_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len)
{
struct m25p *flash = nor->priv;
struct spi_slave *spi = flash->spi;
@@ -82,9 +82,9 @@ static int m25p80_write_reg(struct spi_nor *nor, u8 cmd, u8
*buf, int len)
if (nor->flags & SNOR_F_U_PAGE)
spi->flags |= SPI_XFER_U_PAGE;
- ret = spi_write_then_read(spi, &cmd, 1, buf, NULL, len);
+ ret = spi_write_then_read(spi, &opcode, 1, buf, NULL, len);
if (ret < 0) {
- debug("m25p80: error %d writing register %x\n", ret, cmd);
+ debug("m25p80: error %d writing register %x\n", ret, opcode);
return ret;
}
--
1.9.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
