opcode handling is part of spi_nor_addr routine, since
it's been part of m25p80 so rename the function related
to that file name.
Cc: Simon Glass <s...@chromium.org>
Cc: Bin Meng <bmeng...@gmail.com>
Cc: Mugunthan V N <mugunthan...@ti.com>
Cc: Michal Simek <michal.si...@xilinx.com>
Cc: Siva Durga Prasad Paladugu <siva...@xilinx.com>
Signed-off-by: Jagan Teki <jt...@openedev.com>
---
drivers/mtd/spi-nor/m25p80.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/mtd/spi-nor/m25p80.c b/drivers/mtd/spi-nor/m25p80.c
index 560e5b2..a6e9cfe 100644
--- a/drivers/mtd/spi-nor/m25p80.c
+++ b/drivers/mtd/spi-nor/m25p80.c
@@ -27,7 +27,7 @@ struct m25p {
u8 command[MAX_CMD_SIZE];
};
-static void spi_nor_addr(u32 addr, u8 *cmd)
+static void m25p_addr2cmd(u32 addr, u8 *cmd)
{
/* cmd[0] is actual command */
cmd[1] = addr >> 16;
@@ -136,7 +136,7 @@ static int m25p80_read(struct spi_nor *nor, loff_t from,
size_t len,
}
flash->command[0] = nor->read_opcode;
- spi_nor_addr(from, flash->command);
+ m25p_addr2cmd(from, flash->command);
if (nor->flags & SNOR_F_U_PAGE)
spi->flags |= SPI_XFER_U_PAGE;
@@ -171,7 +171,7 @@ static int m25p80_write(struct spi_nor *nor, loff_t to,
size_t len,
cmd_sz = 1;
flash->command[0] = nor->program_opcode;
- spi_nor_addr(to, flash->command);
+ m25p_addr2cmd(to, flash->command);
if (nor->flags & SNOR_F_U_PAGE)
spi->flags |= SPI_XFER_U_PAGE;
@@ -204,7 +204,7 @@ static int m25p80_erase(struct spi_nor *nor, loff_t offset)
}
flash->command[0] = nor->erase_opcode;
- spi_nor_addr(offset, flash->command);
+ m25p_addr2cmd(offset, flash->command);
if (nor->flags & SNOR_F_U_PAGE)
spi->flags |= SPI_XFER_U_PAGE;
--
1.9.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
