The System Control block moved to a completely different register
map for ARMv8 SoCs, so it cannot be shared with the ARM 32-bit ones.
Define register macros in a new header file.

Signed-off-by: Masahiro Yamada <yamada.masah...@socionext.com>
---

 arch/arm/mach-uniphier/sc64-regs.h | 44 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 44 insertions(+)
 create mode 100644 arch/arm/mach-uniphier/sc64-regs.h

diff --git a/arch/arm/mach-uniphier/sc64-regs.h 
b/arch/arm/mach-uniphier/sc64-regs.h
new file mode 100644
index 0000000..ef02830
--- /dev/null
+++ b/arch/arm/mach-uniphier/sc64-regs.h
@@ -0,0 +1,44 @@
+/*
+ * UniPhier SC (System Control) block registers for ARMv8 SoCs
+ *
+ * Copyright (C) 2016 Masahiro Yamada <yamada.masah...@socionext.com>
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ */
+
+#ifndef SC64_REGS_H
+#define SC64_REGS_H
+
+#define SC_BASE_ADDR           0x61840000
+
+#define SC_RSTCTRL             (SC_BASE_ADDR | 0x2000)
+#define SC_RSTCTRL3            (SC_BASE_ADDR | 0x2008)
+#define SC_RSTCTRL4            (SC_BASE_ADDR | 0x200c)
+#define   SC_RSTCTRL4_ETHER            (1 << 6)
+#define   SC_RSTCTRL4_NAND             (1 << 0)
+#define SC_RSTCTRL5            (SC_BASE_ADDR | 0x2010)
+#define SC_RSTCTRL6            (SC_BASE_ADDR | 0x2014)
+#define SC_RSTCTRL7            (SC_BASE_ADDR | 0x2018)
+#define   SC_RSTCTRL7_UMCSB            (1 << 16)
+#define   SC_RSTCTRL7_UMCA2            (1 << 10)
+#define   SC_RSTCTRL7_UMCA1            (1 << 9)
+#define   SC_RSTCTRL7_UMCA0            (1 << 8)
+#define   SC_RSTCTRL7_UMC32            (1 << 2)
+#define   SC_RSTCTRL7_UMC31            (1 << 1)
+#define   SC_RSTCTRL7_UMC30            (1 << 0)
+
+#define SC_CLKCTRL             (SC_BASE_ADDR | 0x2100)
+#define SC_CLKCTRL3            (SC_BASE_ADDR | 0x2108)
+#define SC_CLKCTRL4            (SC_BASE_ADDR | 0x210c)
+#define   SC_CLKCTRL4_PERI             (1 << 7)
+#define   SC_CLKCTRL4_ETHER            (1 << 6)
+#define   SC_CLKCTRL4_NAND             (1 << 0)
+#define SC_CLKCTRL5            (SC_BASE_ADDR | 0x2110)
+#define SC_CLKCTRL6            (SC_BASE_ADDR | 0x2114)
+#define SC_CLKCTRL7            (SC_BASE_ADDR | 0x2118)
+#define   SC_CLKCTRL7_UMCSB            (1 << 16)
+#define   SC_CLKCTRL7_UMC32            (1 << 2)
+#define   SC_CLKCTRL7_UMC31            (1 << 1)
+#define   SC_CLKCTRL7_UMC30            (1 << 0)
+
+#endif /* SC64_REGS_H */
-- 
1.9.1

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to