Hi Simon,
On Sat, Mar 12, 2016 at 07:51:51PM -0700, Simon Glass wrote:
>Hi Peng,
>
>On 11 March 2016 at 22:19, Peng Fan <van.free...@gmail.com> wrote:
>> Before set value for a gpio, need to set its direction to
>> output first.
>>
>> Signed-off-by: Peng Fan <van.free...@gmail.com>
>> Cc: Przemyslaw Marczak <p.marc...@samsung.com>
>> Cc: Simon Glass <s...@chromium.org>
>> ---
>> drivers/power/regulator/fixed.c | 5 +++++
>> 1 file changed, 5 insertions(+)
>>
>> diff --git a/drivers/power/regulator/fixed.c
>> b/drivers/power/regulator/fixed.c
>> index d053817..1b0d193 100644
>> --- a/drivers/power/regulator/fixed.c
>> +++ b/drivers/power/regulator/fixed.c
>> @@ -95,6 +95,11 @@ static int fixed_regulator_set_enable(struct udevice
>> *dev, bool enable)
>> if (!dev_pdata->gpio.dev)
>> return -ENOSYS;
>>
>> + ret = dm_gpio_set_dir_flags(&dev_pdata->gpio, GPIOD_IS_OUT);
>> + if (ret) {
>> + error("Can't set out direction : %s gpio\n", dev->name);
>> + return ret;
>> + }
>> ret = dm_gpio_set_value(&dev_pdata->gpio, enable);
>> if (ret) {
>> error("Can't set regulator : %s gpio to: %d\n", dev->name,
>> --
>> 2.6.2
>>
>
>This should already be done by the GPIOD_IS_OUT flag in
>fixed_regulator_ofdata_to_platdata().
Oh. Thanks for correcting me.
>
>BTW I notice that mxc_gpio.c does not have an xlate() method, so
>GPIO_ACTIVE_LOW will not be supported.
Yeah. I got it and already have patch for it. After do some test,
will send it out for the xlate in mxc_gpio.c
Regards,
Peng.
>
>Regards,
>Simon
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
