On Tuesday 08 March 2016 05:06 AM, Tom Rini wrote: > On Sat, Mar 05, 2016 at 05:32:27PM +0530, Lokesh Vutla wrote: > >> This series fixes miscellaneous bugs for the emif driver. >> >> Lokesh Vutla (4): >> ARM: DRA7: emif: Fix updating of refresh ctrl shadow >> ARM: DRA7: emif: Fix DDR init sequence during warm reset >> ARM: DRA7: emif: Check for enable bits before updating leveling output >> ARM: DRA7: emif: Enable interleaving for higher address space >> >> arch/arm/cpu/armv7/omap-common/emif-common.c | 50 >> ++++++++++++++++++---------- >> arch/arm/cpu/armv7/omap5/sdram.c | 34 ++++++++++++++----- >> arch/arm/include/asm/emif.h | 9 +++++ >> 3 files changed, 67 insertions(+), 26 deletions(-) > > Note that my board is still unable to boot from mainline with these > applied but still works with the TI vendor tree.
Hmm..I guess you are talking about DRA72-evm. SPL even doesn't come up or U-boot is failing. Can I see the logs? And what switch settings are you using?(Ill try to reproduce in my place) Thanks and regards, Lokesh > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot