As each core starts up, record its microcode version and CPU ID so these can
be presented with the 'cpu detail' command.
Signed-off-by: Simon Glass <s...@chromium.org>
---
arch/x86/cpu/intel_common/microcode_intel.c | 2 +-
arch/x86/cpu/mp_init.c | 5 +++++
arch/x86/include/asm/microcode.h | 9 +++++++++
3 files changed, 15 insertions(+), 1 deletion(-)
diff --git a/arch/x86/cpu/intel_common/microcode_intel.c
b/arch/x86/cpu/intel_common/microcode_intel.c
index 3054fab..26b1316 100644
--- a/arch/x86/cpu/intel_common/microcode_intel.c
+++ b/arch/x86/cpu/intel_common/microcode_intel.c
@@ -64,7 +64,7 @@ static int microcode_decode_node(const void *blob, int node,
return 0;
}
-static inline uint32_t microcode_read_rev(void)
+int microcode_read_rev(void)
{
/*
* Some Intel CPUs can be very finicky about the CPUID sequence used.
diff --git a/arch/x86/cpu/mp_init.c b/arch/x86/cpu/mp_init.c
index ca47e9e..94ddbbb 100644
--- a/arch/x86/cpu/mp_init.c
+++ b/arch/x86/cpu/mp_init.c
@@ -15,6 +15,7 @@
#include <asm/cpu.h>
#include <asm/interrupt.h>
#include <asm/lapic.h>
+#include <asm/microcode.h>
#include <asm/mp.h>
#include <asm/msr.h>
#include <asm/mtrr.h>
@@ -560,12 +561,16 @@ int mp_init(struct mp_params *p)
int mp_init_cpu(struct udevice *cpu, void *unused)
{
+ struct cpu_platdata *plat = dev_get_parent_platdata(cpu);
+
/*
* Multiple APs are brought up simultaneously and they may get the same
* seq num in the uclass_resolve_seq() during device_probe(). To avoid
* this, set req_seq to the reg number in the device tree in advance.
*/
cpu->req_seq = fdtdec_get_int(gd->fdt_blob, cpu->of_offset, "reg", -1);
+ plat->ucode_version = microcode_read_rev();
+ plat->device_id = cpuid_eax(1);
return device_probe(cpu);
}
diff --git a/arch/x86/include/asm/microcode.h b/arch/x86/include/asm/microcode.h
index 67f32cc..0478935 100644
--- a/arch/x86/include/asm/microcode.h
+++ b/arch/x86/include/asm/microcode.h
@@ -18,6 +18,15 @@
* not updates were found, -EINVAL if an update was invalid
*/
int microcode_update_intel(void);
+
+/**
+ * microcode_read_rev() - Read the microcode version
+ *
+ * This reads the microcode version of the currently running CPU
+ *
+ * @return microcode version number
+ */
+int microcode_read_rev(void);
#endif /* __ASSEMBLY__ */
#endif
--
2.7.0.rc3.207.g0ac5344
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
