On 2 March 2016 at 23:11, Phil Reid <pr...@electromag.com.au> wrote:
> On 3/03/2016 2:49 PM, George Broz wrote:
>>
>> On 1 March 2016 at 19:49, Phil Reid <pr...@electromag.com.au> wrote:
>>>
>>> On 2/03/2016 10:40 AM, George Broz wrote:
>>>
>>>> Sorry for the delayed response - got called away, but am back to this
>>>> now. I patched
>>>> socfpga_common.h and re-built the project. I picked up
>>>> spl/u-boot-spl-dtb.sfp and
>>>> u-boot-dtb.img and transferred them to the SD card with:
>>>>
>>>> dd if=u-boot-spl-dtb.sfp of=/dev/sdf3 bs=64k seek=0
>>>> dd if=u-boot-dtb.img of=/dev/sdf3 bs=64k seek=4
>>>>
>>>> Tried this with both the original DT set (socfpga.dtsi,
>>>> socfpga_cyclone.dtsi,
>>>> socfpga_cyclone5_sockit.dts) that came with the u-boot v2016.01 download
>>>> and
>>>> also an Altera-patched DT set that I've used to boot into Linux numerous
>>>> times.
>>>>
>>>> When I start up the board I get:
>>>>
>>>> U-Boot SPL 2016.01 (Mar 01 2016 - 17:28:14)
>>>> drivers/ddr/altera/sequencer.c: Preparing to start memory calibration
>>>> drivers/ddr/altera/sequencer.c: CALIBRATION FAILED
>>>> drivers/ddr/altera/sequencer.c: Calibration complete
>>>> SDRAM calibration failed.
>>>> ### ERROR ### Please RESET the board ###
>>>>
>>>> I'm not a Quartus user, so I haven't done anything with the
>>>> qts-filter.sh script you
>>>> mentioned. Do I need to? I don't have any custom FPGA logic - it's
>>>> just the Terasic
>>>> board out of the box.
>>>>
>>>> Thanks for any help!
>>>>
>>>
>>> Even without the custom FPGA logic the files generated from qts-filter.sh
>>> need to match your board.
>>> Sets up PLL and SDRAM parameters.
>>> I'm not familiar with the Terasic dev board ( I do have the altera
>>> devkit,
>>> but haven't used it for awhile).
>>> I'd hope the files in the git repo are correct for your board.
>>> Without the corresponding qsys project it's hard to be sure.
>>>
>> Hi Phil,
>>
>> So as my next attempt, there was a Quartus/Qsys example that came
>> with the Terasic board (specific to my Rev. of the board).
>>
>> * I took the contents of the 'handoff folder', .sof, and .sopcinfo file.
>> * launched an "Embedded Command Shell" from EDS 15.0 and then the BSP
>> editor GUI
>> * pointed the BSP editor to the "handoff folder", and hit "Generate"
>> to produce iocsr, pinmux, pll, etc. files
>> * applied qts-filter.sh to these files, the output of which I then
>> dropped into the u-boot source @ ../board/terasic/sockit/qts
>> * rebuilt uboot spl & image, but got a similar result:
>>
>> U-Boot SPL 2016.01 (Mar 02 2016 - 22:13:31)
>> drivers/ddr/altera/sequencer.c: Preparing to start memory calibration
>> drivers/ddr/altera/sequencer.c: CALIBRATION FAILED
>> drivers/ddr/altera/sequencer.c: Calibration complete
>> SDRAM calibration failed.
>> ### ERROR ### Please RESET the board ###
>>
>> Except now it repeats four times, whereas before it only printed out once.
>>
>> It that essentially the correct procedure? Is it now a matter of
>> looking through
>> the include files that where generated by qts-filter.sh to find a
>> setting that is "off"?
>>
>> (BTW - my first attempt was to use EDS 13.0, but that resulted in
>> several undefined macros when it
>> came time to compile u-boot with the qts-filter-generated code. How
>> does one know which tool version to use?)
>>
>
> What does a diff of the new files show compared to the ones in uboot.
Here's two of them...
---
/home/mcis/altera/uboot-native/u-boot-socfpga-2016.01/board/terasic/sockit/qts/sdram_config.h.orig
+++
/home/mcis/altera/uboot-native/u-boot-socfpga-2016.01/board/terasic/sockit/qts/sdram_config.h
@@ -33,10 +33,10 @@
#define CONFIG_HPS_SDR_CTRLCFG_DRAMODT_WRITE 1
#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_AL 0
#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TCL 7
-#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TCWL 6
-#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TFAW 12
-#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TRFC 104
-#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TRRD 4
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TCWL 7
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TFAW 15
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TRFC 120
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TRRD 3
#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TRCD 6
#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TREFI 3120
#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TRP 6
@@ -46,12 +46,12 @@
#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TMRD 4
#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRAS 14
#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRC 20
-#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRTP 4
+#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRTP 3
#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING4_PWRDOWNEXIT 3
#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING4_SELFRFSHEXIT 512
#define CONFIG_HPS_SDR_CTRLCFG_FIFOCFG_INCSYNC 0
#define CONFIG_HPS_SDR_CTRLCFG_FIFOCFG_SYNCMODE 0
-#define CONFIG_HPS_SDR_CTRLCFG_FPGAPORTRST 0x1FF
+#define CONFIG_HPS_SDR_CTRLCFG_FPGAPORTRST 0x0
#define CONFIG_HPS_SDR_CTRLCFG_LOWPWREQ_SELFRFSHMASK 3
#define CONFIG_HPS_SDR_CTRLCFG_LOWPWRTIMING_AUTOPDCYCLES 0
#define CONFIG_HPS_SDR_CTRLCFG_LOWPWRTIMING_CLKDISABLECYCLES 8
@@ -147,7 +147,7 @@
#define IO_SHIFT_DQS_EN_WHEN_SHIFT_DQS 0
#define MAX_LATENCY_COUNT_WIDTH 5
#define READ_VALID_FIFO_SIZE 16
-#define REG_FILE_INIT_SEQ_SIGNATURE 0x5555048d
+#define REG_FILE_INIT_SEQ_SIGNATURE 0x5555048c
#define RW_MGR_MEM_ADDRESS_MIRRORING 0
#define RW_MGR_MEM_DATA_MASK_WIDTH 4
#define RW_MGR_MEM_DATA_WIDTH 32
@@ -168,19 +168,20 @@
#define TRESET_CNTR2_VAL 10
/* Sequencer ac_rom_init configuration */
-const u32 ac_rom_init[] = {
+const u32 ac_rom_init[] =
+{
0x20700000,
0x20780000,
0x10080431,
0x10080530,
0x10090044,
- 0x100a0008,
+ 0x100a0010,
0x100b0000,
0x10380400,
0x10080449,
0x100804c8,
0x100a0024,
- 0x10090010,
+ 0x10090008,
0x100b0000,
0x30780000,
0x38780000,
@@ -208,7 +209,8 @@
};
/* Sequencer inst_rom_init configuration */
-const u32 inst_rom_init[] = {
+const u32 inst_rom_init[] =
+{
0x80000,
0x80680,
0x8180,
---
/home/mcis/altera/uboot-native/u-boot-socfpga-2016.01/board/terasic/sockit/qts/pll_config.h.orig
+++
/home/mcis/altera/uboot-native/u-boot-socfpga-2016.01/board/terasic/sockit/qts/pll_config.h
@@ -16,7 +16,7 @@
#define CONFIG_HPS_MAINPLLGRP_DBGATCLK_CNT 0
#define CONFIG_HPS_MAINPLLGRP_MAINQSPICLK_CNT 4
#define CONFIG_HPS_MAINPLLGRP_MAINNANDSDMMCCLK_CNT 511
-#define CONFIG_HPS_MAINPLLGRP_CFGS2FUSER0CLK_CNT 14
+#define CONFIG_HPS_MAINPLLGRP_CFGS2FUSER0CLK_CNT 18
#define CONFIG_HPS_MAINPLLGRP_MAINDIV_L3MPCLK 1
#define CONFIG_HPS_MAINPLLGRP_MAINDIV_L3SPCLK 1
#define CONFIG_HPS_MAINPLLGRP_MAINDIV_L4MPCLK 1
> I'm using the Quartus 15.0 tool chain at the moment.
> Turning on debugging in drivers/ddr/altera/sequencer.c may help.
>
Setting DLEVEL = 2 yields:
U-Boot SPL 2016.01 (Mar 03 2016 - 06:28:33)
drivers/ddr/altera/sequencer.c: Preparing to start memory calibration
find_vfifo_failing_read:1519: vfifo 0
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
find_vfifo_failing_read:1519: vfifo 1
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (31 != 0) => 1
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (31 != 0) => 1
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (31 != 0) => 1
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (31 != 0) => 1
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (31 != 0) => 1
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (31 != 0) => 1
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (31 != 0) => 1
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (31 != 0) => 1
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (31 != 0) => 1
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase:1864 p: ptap=4
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (31 != 0) => 1
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (31 != 0) => 1
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (31 != 0) => 1
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (31 != 0) => 1
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (31 != 0) => 1
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (31 != 0) => 1
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (31 != 0) => 1
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (31 != 0) => 1
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase:1877 p/d: ptap=4 dtap=7 end=16399
rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase:1887 found range [14003,16399]
rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase:1895 calculate
dtaps_per_ptap for tracking
rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase:1906 backedup phase only:
p=3rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase:1919 find passing read
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (31 != 0) => 1
rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase:1927 find failing read
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (31 != 0) => 1
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (31 != 0) => 1
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (31 != 0) => 1
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (31 != 0) => 1
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (31 != 0) => 1
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (31 != 0) => 1
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (31 != 0) => 1
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (31 != 0) => 1
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (31 != 0) => 1
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (31 != 0) => 1
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (31 != 0) => 1
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (31 != 0) => 1
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) => 0
rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase:1948 dtaps_per_ptap=21 -
8 = 13work_bgn=14003 work_end=16399 work_mid=15201
vfifo ptap delay 2496
new work_mid 225
new p 0, tmp_delay=0
new d 9, tmp_delay=225
find_dqs_en_phase: center
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (31 != 0) => 1
sdr_find_window_center:1779 center: found: ptap=0 dtap=9
rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (255 != 0) => 1
search_stop_check:2006 center(left): dtap=0 => 255 == 255 &&
0rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (255 != 0)
=> 1
search_stop_check:2006 center(left): dtap=1 => 255 == 255 &&
0rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (255 != 0)
=> 1
search_stop_check:2006 center(left): dtap=2 => 255 == 255 &&
0rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (255 != 0)
=> 1
search_stop_check:2006 center(left): dtap=3 => 255 == 255 &&
0rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (255 != 0)
=> 1
search_stop_check:2006 center(left): dtap=4 => 255 == 255 &&
0rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (255 != 0)
=> 1
search_stop_check:2006 center(left): dtap=5 => 255 == 255 &&
0rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (255 != 0)
=> 1
search_stop_check:2006 center(left): dtap=6 => 255 == 255 &&
0rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (255 != 0)
=> 1
search_stop_check:2006 center(left): dtap=7 => 255 == 255 &&
0rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (255 != 0)
=> 1
search_stop_check:2006 center(left): dtap=8 => 255 == 255 &&
0rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (255 != 0)
=> 1
search_stop_check:2006 center(left): dtap=9 => 255 == 255 &&
0rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (255 != 0)
=> 1
search_stop_check:2006 center(left): dtap=10 => 255 == 255 &&
0rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (255 != 0)
=> 1
search_stop_check:2006 center(left): dtap=11 => 255 == 255 &&
0rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (255 != 0)
=> 1
search_stop_check:2006 center(left): dtap=12 => 255 == 255 &&
0rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (255 != 0)
=> 1
search_stop_check:2006 center(left): dtap=13 => 255 == 255 &&
0rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (255 != 0)
=> 1
search_stop_check:2006 center(left): dtap=14 => 255 == 255 &&
0rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (255 != 0)
=> 1
search_stop_check:2006 center(left): dtap=15 => 255 == 255 &&
0rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (187 != 0)
=> 1
search_stop_check:2006 center(left): dtap=16 => 255 == 255 &&
0rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (179 != 0)
=> 1
search_stop_check:2006 center(left): dtap=17 => 255 == 255 &&
0rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (19 != 0)
=> 1
search_stop_check:2006 center(left): dtap=18 => 255 == 255 &&
0rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (17 != 0)
=> 1
search_stop_check:2006 center(left): dtap=19 => 255 == 255 &&
0rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (16 != 0)
=> 1
search_stop_check:2006 center(left): dtap=20 => 255 == 255 &&
0rw_mgr_mem_calibrate_read_test:1457 read_test(0,ONE,0) => (0 != 0) =>
0
search_stop_check:2006 center(left): dtap=21 => 255 == 255 &&à
Will try to make sense of these today...
Any insights welcome!
Thanks,
--George
>
> --
> Regards
> Phil Reid
>
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
