Hi Stephen,
On 23.02.2016 19:03, Stephen Warren wrote:
On 02/23/2016 05:59 AM, Julian Scheel wrote:
Add support for platforms based on the Meerkat COM module. Includes
support
for the minimal reference platform called Kein Baseboard, which in
fact is
sufficient to run most existing Meerkat carriers.
diff --git a/arch/arm/dts/tegra124-meerkat.dtsi
b/arch/arm/dts/tegra124-meerkat.dtsi
+ aliases {
+ i2c0 = "/i2c@7000c000";
+ i2c1 = "/i2c@7000c400";
+ i2c2 = "/i2c@7000c500";
+ i2c3 = "/i2c@7000c700";
+ i2c4 = "/i2c@7000d000";
+ i2c5 = "/i2c@7000d100";
/i2c@7000d000 is alias i2c0 on all other Tegra boards that have I2C
aliases.
we just had a quick discussion about this and actually we explicitly
changed it in our tree to a linear mapping of the controller addresses
to be in sync with what we have in the l4t kernel.
If it won't hurt you too much we'd like to keep it that way. Though if
you feel really bad about it, we can change it to use the same mapping
as Jetson uses.
-Julian
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
