This adds support for the Avionic Design Tegra124 platform. It consists of the Meerkat SOM and a minimal baseboard Kein Baseboard. The as3722 is placed on a different bus as compared to nvidia Jetson, which makes the as3722 required.
Alban Bedel (1): power: as3722: Allow using on any i2c bus with any address Julian Scheel (1): Add support the Avionic Design Meerkat COM and Kein Baseboard arch/arm/dts/Makefile | 1 + arch/arm/dts/tegra124-kein-baseboard.dts | 66 ++++ arch/arm/dts/tegra124-meerkat.dtsi | 395 +++++++++++++++++++++ arch/arm/mach-tegra/board2.c | 2 +- arch/arm/mach-tegra/tegra124/Kconfig | 9 + board/avionic-design/common/meerkat.c | 70 ++++ .../avionic-design/common/pinmux-config-meerkat.h | 233 ++++++++++++ board/avionic-design/kein-baseboard/Kconfig | 15 + board/avionic-design/kein-baseboard/MAINTAINERS | 7 + board/avionic-design/kein-baseboard/Makefile | 9 + board/nvidia/jetson-tk1/jetson-tk1.c | 2 +- configs/kein-baseboard_defconfig | 21 ++ drivers/power/as3722.c | 4 +- include/configs/kein-baseboard.h | 76 ++++ include/power/as3722.h | 2 +- 15 files changed, 906 insertions(+), 6 deletions(-) create mode 100644 arch/arm/dts/tegra124-kein-baseboard.dts create mode 100644 arch/arm/dts/tegra124-meerkat.dtsi create mode 100644 board/avionic-design/common/meerkat.c create mode 100644 board/avionic-design/common/pinmux-config-meerkat.h create mode 100644 board/avionic-design/kein-baseboard/Kconfig create mode 100644 board/avionic-design/kein-baseboard/MAINTAINERS create mode 100644 board/avionic-design/kein-baseboard/Makefile create mode 100644 configs/kein-baseboard_defconfig create mode 100644 include/configs/kein-baseboard.h -- 2.7.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
