On 02/21/2016 11:07 PM, Huan Wang wrote:
> Hi, York,
>
>> On Tue, Feb 9, 2016 at 8:57 AM, York Sun <york....@nxp.com> wrote:
>>> Convert ls1021aqds_nor_lpuart and ls1021aqds_ddr4_nor_lpuart to driver
>>> model suport. Enable lpuart port driver.
>>>
>>> Signed-off-by: York Sun <york....@nxp.com>
>>> CC: Alison Wang <alison.w...@nxp.com>
>>> CC: Bin Meng <bmeng...@gmail.com>
>>>
>>> ---
>>>
>>> arch/arm/dts/Makefile | 1 +
>>> arch/arm/dts/ls1021a-qds-lpuart.dts | 16 ++++++++++++++++
>>> configs/ls1021aqds_ddr4_nor_lpuart_defconfig | 4 ++++
>>> configs/ls1021aqds_nor_lpuart_defconfig | 4 ++++
>>> 4 files changed, 25 insertions(+)
>>> create mode 100644 arch/arm/dts/ls1021a-qds-lpuart.dts
>>>
>>> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index
>>> ef58aec..c27b80c 100644
>>> --- a/arch/arm/dts/Makefile
>>> +++ b/arch/arm/dts/Makefile
>>> @@ -95,6 +95,7 @@ dtb-$(CONFIG_TARGET_BEAGLE_X15) +=
>>> am57xx-beagle-x15.dtb
>>> dtb-$(CONFIG_TARGET_STV0991) += stv0991.dtb
>>>
>>> dtb-$(CONFIG_LS102XA) += ls1021a-qds-duart.dtb \
>>> + ls1021a-qds-lpuart.dtb \
>>> ls1021a-twr-duart.dtb ls1021a-twr-lpuart.dtb
>>> dtb-$(CONFIG_FSL_LSCH3) += fsl-ls2080a-qds.dtb \
>>> fsl-ls2080a-rdb.dtb
>>> diff --git a/arch/arm/dts/ls1021a-qds-lpuart.dts
>>> b/arch/arm/dts/ls1021a-qds-lpuart.dts
>>> new file mode 100644
>>> index 0000000..1d16ffd
>>> --- /dev/null
>>> +++ b/arch/arm/dts/ls1021a-qds-lpuart.dts
>>> @@ -0,0 +1,16 @@
>>> +/*
>>> + * Freescale ls1021a QDS board common device tree source
>>> + *
>>> + * Copyright 2013-2015 Freescale Semiconductor, Inc.
>>> + *
>>> + * SPDX-License-Identifier: GPL-2.0+
>>> + */
>>> +
>>> +/dts-v1/;
>>> +#include "ls1021a-qds.dtsi"
>>> +
>>> +/ {
>>> + chosen {
>>> + stdout-path = &lpuart0;
>>> + };
>>> +};
>>> diff --git a/configs/ls1021aqds_ddr4_nor_lpuart_defconfig
>>> b/configs/ls1021aqds_ddr4_nor_lpuart_defconfig
>>> index 44b2a0d..ffac6dd 100644
>>> --- a/configs/ls1021aqds_ddr4_nor_lpuart_defconfig
>>> +++ b/configs/ls1021aqds_ddr4_nor_lpuart_defconfig
>>> @@ -1,7 +1,11 @@
>>> CONFIG_ARM=y
>>> CONFIG_TARGET_LS1021AQDS=y
>>> CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4,LPUART"
>>> +CONFIG_DM_SERIAL=y
>>> +CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds-duart"
>>
>> I believe this should be "ls1021a-qds-lpuart"?
>>
>>> # CONFIG_CMD_SETEXPR is not set
>>> +CONFIG_OF_CONTROL=y
>>> +CONFIG_DM=y
>>> CONFIG_NETDEVICES=y
>>> CONFIG_E1000=y
>>> CONFIG_FSL_LPUART=y
>>> diff --git a/configs/ls1021aqds_nor_lpuart_defconfig
>>> b/configs/ls1021aqds_nor_lpuart_defconfig
>>> index 1186af2..e81448d 100644
>>> --- a/configs/ls1021aqds_nor_lpuart_defconfig
>>> +++ b/configs/ls1021aqds_nor_lpuart_defconfig
>>> @@ -1,7 +1,11 @@
>>> CONFIG_ARM=y
>>> CONFIG_TARGET_LS1021AQDS=y
>>> +CONFIG_DM_SERIAL=y
>>> +CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds-lpuart"
>>> CONFIG_SYS_EXTRA_OPTIONS="LPUART"
>>> # CONFIG_CMD_SETEXPR is not set
>>> +CONFIG_OF_CONTROL=y
>>> +CONFIG_DM=y
>>> CONFIG_NETDEVICES=y
>>> CONFIG_E1000=y
>>> CONFIG_FSL_LPUART=y
>>> --
>>
> [Alison Wang] I reviewed this set, and have no other comments except Bin
> Meng's.
>
> BTW, I tested this set on LS1021AQDS board with that little modification
> about the comment.
>
Thanks. I will send out an update.
York
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
