Hi, York,
> On Tue, Feb 9, 2016 at 8:57 AM, York Sun <york....@nxp.com> wrote:
> > Convert ls1021aqds_nor_lpuart and ls1021aqds_ddr4_nor_lpuart to driver
> > model suport. Enable lpuart port driver.
> >
> > Signed-off-by: York Sun <york....@nxp.com>
> > CC: Alison Wang <alison.w...@nxp.com>
> > CC: Bin Meng <bmeng...@gmail.com>
> >
> > ---
> >
> > arch/arm/dts/Makefile | 1 +
> > arch/arm/dts/ls1021a-qds-lpuart.dts | 16 ++++++++++++++++
> > configs/ls1021aqds_ddr4_nor_lpuart_defconfig | 4 ++++
> > configs/ls1021aqds_nor_lpuart_defconfig | 4 ++++
> > 4 files changed, 25 insertions(+)
> > create mode 100644 arch/arm/dts/ls1021a-qds-lpuart.dts
> >
> > diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index
> > ef58aec..c27b80c 100644
> > --- a/arch/arm/dts/Makefile
> > +++ b/arch/arm/dts/Makefile
> > @@ -95,6 +95,7 @@ dtb-$(CONFIG_TARGET_BEAGLE_X15) +=
> > am57xx-beagle-x15.dtb
> > dtb-$(CONFIG_TARGET_STV0991) += stv0991.dtb
> >
> > dtb-$(CONFIG_LS102XA) += ls1021a-qds-duart.dtb \
> > + ls1021a-qds-lpuart.dtb \
> > ls1021a-twr-duart.dtb ls1021a-twr-lpuart.dtb
> > dtb-$(CONFIG_FSL_LSCH3) += fsl-ls2080a-qds.dtb \
> > fsl-ls2080a-rdb.dtb
> > diff --git a/arch/arm/dts/ls1021a-qds-lpuart.dts
> > b/arch/arm/dts/ls1021a-qds-lpuart.dts
> > new file mode 100644
> > index 0000000..1d16ffd
> > --- /dev/null
> > +++ b/arch/arm/dts/ls1021a-qds-lpuart.dts
> > @@ -0,0 +1,16 @@
> > +/*
> > + * Freescale ls1021a QDS board common device tree source
> > + *
> > + * Copyright 2013-2015 Freescale Semiconductor, Inc.
> > + *
> > + * SPDX-License-Identifier: GPL-2.0+
> > + */
> > +
> > +/dts-v1/;
> > +#include "ls1021a-qds.dtsi"
> > +
> > +/ {
> > + chosen {
> > + stdout-path = &lpuart0;
> > + };
> > +};
> > diff --git a/configs/ls1021aqds_ddr4_nor_lpuart_defconfig
> > b/configs/ls1021aqds_ddr4_nor_lpuart_defconfig
> > index 44b2a0d..ffac6dd 100644
> > --- a/configs/ls1021aqds_ddr4_nor_lpuart_defconfig
> > +++ b/configs/ls1021aqds_ddr4_nor_lpuart_defconfig
> > @@ -1,7 +1,11 @@
> > CONFIG_ARM=y
> > CONFIG_TARGET_LS1021AQDS=y
> > CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4,LPUART"
> > +CONFIG_DM_SERIAL=y
> > +CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds-duart"
>
> I believe this should be "ls1021a-qds-lpuart"?
>
> > # CONFIG_CMD_SETEXPR is not set
> > +CONFIG_OF_CONTROL=y
> > +CONFIG_DM=y
> > CONFIG_NETDEVICES=y
> > CONFIG_E1000=y
> > CONFIG_FSL_LPUART=y
> > diff --git a/configs/ls1021aqds_nor_lpuart_defconfig
> > b/configs/ls1021aqds_nor_lpuart_defconfig
> > index 1186af2..e81448d 100644
> > --- a/configs/ls1021aqds_nor_lpuart_defconfig
> > +++ b/configs/ls1021aqds_nor_lpuart_defconfig
> > @@ -1,7 +1,11 @@
> > CONFIG_ARM=y
> > CONFIG_TARGET_LS1021AQDS=y
> > +CONFIG_DM_SERIAL=y
> > +CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds-lpuart"
> > CONFIG_SYS_EXTRA_OPTIONS="LPUART"
> > # CONFIG_CMD_SETEXPR is not set
> > +CONFIG_OF_CONTROL=y
> > +CONFIG_DM=y
> > CONFIG_NETDEVICES=y
> > CONFIG_E1000=y
> > CONFIG_FSL_LPUART=y
> > --
>
[Alison Wang] I reviewed this set, and have no other comments except Bin Meng's.
BTW, I tested this set on LS1021AQDS board with that little modification about
the comment.
Best Regards,
Alison Wang
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
