On 13.2.2016 11:39, Michal Simek wrote: > Zybo contains on board HDMI that's why enable EDID. > Doing it via config because zynq i2c driver hasn't been moved to DM yet > and enabling via Kconfig requires DM_I2C. > This will be moved that driver is moved to DM. > > Signed-off-by: Michal Simek <mon...@monstr.eu> > --- > > Currently the biggest problem is EEPROM support with DM together. > > Log for zybo: > Zynq> i2c dev 1 > Setting bus to 1 > Zynq> i2c probe > Valid chip addresses: 50 > Zynq> i2c edid 50 > EDID version: 1.3 > Product ID code: 05cd > Manufacturer: SAM > Serial number: 30303033 > Manufactured in week: 42 year: 2010 > Video input definition: digital signal, voltage level 0 > Monitor is non-RGB > Maximum visible display size: 16 cm x 9 cm > Power management features: active off, no suspend, no standby > Estabilished timings: > 640x480 60 Hz (VGA) > 800x600 56 Hz (VESA) > 800x600 60 Hz (VESA) > 1024x768 60 Hz (VESA) > Standard timings: > 1600x1200 60 Hz > 1280x1024 60 Hz > 1280x960 60 Hz > 1280x800 60 Hz > 1440x900 60 Hz > 1680x1050 60 Hz > 1920x1080 60 Hz (detailed) > 1280x720 60 Hz (detailed) > Monitor range limits, horizontal sync: 30-81 kHz, vertical refresh: > 50-60 Hz, max pixel clock: 170 MHz > Monitor name: SyncMaster > > --- > include/configs/zynq_zybo.h | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/include/configs/zynq_zybo.h b/include/configs/zynq_zybo.h > index 644d462c01c9..3db3c13e8a3e 100644 > --- a/include/configs/zynq_zybo.h > +++ b/include/configs/zynq_zybo.h > @@ -24,6 +24,8 @@ > #define CONFIG_CMD_EEPROM > #define CONFIG_ZYNQ_GEM_EEPROM_ADDR 0x50 > #define CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET 0xFA > +#define CONFIG_DISPLAY > +#define CONFIG_I2C_EDID > > /* Define ZYBO PS Clock Frequency to 50MHz */ > #define CONFIG_ZYNQ_PS_CLK_FREQ 50000000UL >
Applied to zynq repo. Thanks, Michal -- Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91 w: www.monstr.eu p: +42-0-721842854 Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/ Maintainer of Linux kernel - Xilinx Zynq ARM architecture Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform
signature.asc
Description: OpenPGP digital signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
