I will provide a patch in two hours and need to andre to verify . Roy
> -----Original Message----- > From: Ben Warren [mailto:biggerbadder...@gmail.com] > Sent: Friday, August 21, 2009 12:02 PM > To: André Schwarz; Zang Roy-R61911 > Cc: U-Boot List > Subject: Re: e1000 Rx timeout with 82541ER > > Andre and Roy, > André Schwarz wrote: > > Roy, > > > > the problem is the modified PBA (packet buffer allocation) constant > > E1000_DEFAULT_PBA. It changed from 0x00000030 to 0x000a0026 lately. > > > > Regarding to the Intel's software developer manual the chips come up > > with sane defaults. There are few which needs modification, > like e.g. > > 82547GI/EI. > > > > Having a look at the Kernel driver clearly shows that the programmed > > parameter depends on MAC type and using a fixed value for > all chips is > > not reasonable at all. > > > > In any case the 82540/1/2/3/4/5/6 are working perfectly fine with > > 0x00000030. > > > > I'd recommend to revert this change and only apply the new > default value > > to those MAC (PCIe ?) where you can verify functionality. > > > > > We're getting very close to the release date. Please supply a patch > soon, or we'll revert Roy's original. > > regards, > Ben > > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
