$ quartus_hps -c 1 -o PV -a 0x0 u-boot-with-spl.sfp.bin // here ".bin" because current programmer requires so. I think it shouldn't be a problem.
>From manual: "HPS Flash Programmer The utility accepts a Binary File with a required ".bin" extension. The HPS flash programmer command-line syntax is: quartus_hps <options> <file.bin>" Info: Version 13.1.0 Build 162 10/23/2013 SJ Full Version After that I power off/on the unit and nothing happened. I also compared md5 while copying - everything should be ok. I tried it 2 times with no success: Looks like unit is no booting. No output in the console is visible. If I change the images back (that is currently in official release) - at least bootloader pass and u-boot is also launching. Does it mean that there is something wrong with SPL configuration? Or maybe I need some patches from altera in order to make them working? Because I can see some traces of applied patches in the svn history. Best regards, Denis Bakhvalov MBB Radio Platforms, RFSW -----Original Message----- From: EXT Marek Vasut [mailto:[email protected]] Sent: Thursday, February 11, 2016 14:02 To: [email protected] Cc: Marek Vasut <[email protected]>; Dinh Nguyen <[email protected]>; Chin Liang See <[email protected]>; Bakhvalov, Denis (Nokia - PL/Wroclaw) <[email protected]> Subject: [PATCH] arm: socfpga: Add missing CONFIG_BUILD_TARGET Add the missing CONFIG_BUILD_TARGET to get u-boot-with-spl.sfp built automatically upon running make in the source tree. Signed-off-by: Marek Vasut <[email protected]> Cc: Dinh Nguyen <[email protected]> Cc: Chin Liang See <[email protected]> Cc: Denis Bakhvalov <[email protected]> --- include/configs/socfpga_common.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h index 8de0ab9..0501bd1 100644 --- a/include/configs/socfpga_common.h +++ b/include/configs/socfpga_common.h @@ -30,6 +30,9 @@ #define CONFIG_TIMESTAMP /* Print image info with timestamp */ +/* add target to build it automatically upon "make" */ +#define CONFIG_BUILD_TARGET "u-boot-with-spl.sfp" + /* * Memory configurations */ -- 2.1.4 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
