Hi all, I'm trying to build a previously known working branch of U-Boot that I built some time back which forks from revision e89d623f099c44b0b166ccf46bce2e6a0b99c984.
I previously built this before, the binaries and source for which are here: http://bne.vrt.com.au/technologicsys/ There you'll find the notes on exactly how I built it too. Since I did development there, I've done a number of system updates on my workstation, and so I suspect one of them has broken something, as when I try to build that U-Boot branch and `dd` the resulting `u-boot.sd` (according to the documentation in doc/README.mxs), I now get the following error code displayed: HTLLCL0x8050100b The documentation I found here http://www.denx-cs.de/?q=blogm28mxssb seemed to suggest the following meaning: .--------------- Valid SB |.-------------- SB tag ||.------------- u-boot-spl.bin loaded |||.------------ IVT loaded ||||.----------- SPL executed |||||.---------- U-Boot binary loaded HTLLCL0x8050100b '--------' CRC Error I'm guessing "IVT" here means interrupt vector table, and that the lack of a second 'L' suggests it was loading of this interrupt vector table that failed due to a CRC error. I've tried building u-boot with a number of different toolchains: - binutils-2.25.1, gcc-4.7.3, glibc, EABI, built using Gentoo crossdev - arm-none-eabi toolchain, self-built using sources from https://launchpad.net/gcc-arm-embedded - Linaro arm EABI toolchain from http://releases.linaro.org/14.11/components/toolchain/binaries/arm-linux-gnueabi/ None of these seem to generate a successfully booting binary, which is perplexing to say the least. Is there somewhere else I should be looking for the cause of the above issue? Regards, -- _ ___ Stuart Longland - Systems Engineer \ /|_) | T: +61 7 3535 9619 \/ | \ | 38b Douglas Street F: +61 7 3535 9699 SYSTEMS Milton QLD 4064 http://www.vrt.com.au _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
