Chin Liang See <cl...@altera.com> writes: > On Fri, 2016-01-22 at 10:35 -0600, Dinh Nguyen wrote: >> On 01/21/2016 10:31 AM, Marek Vasut wrote: >> > On Thursday, January 21, 2016 at 05:20:33 PM, Måns Rullgård wrote: >> > > Tom Rini <tr...@konsulko.com> writes: >> > > > On Wed, Jan 20, 2016 at 08:31:30PM +0000, Måns Rullgård wrote: >> > > > > I'm having a problem with u-boot 2016.01 failing to detect >> > > > > the FPGA on my Altera Cyclone V SoC Development Kit. On >> > > > > startup, it simply prints "FPGA: Not Altera chip ID" (the ID >> > > > > having been read as all -zero). No amount of messing with >> > > > > jumpers or switches makes a difference. The software on the >> > > > > SD card included in the box appears to work, so on a whim I >> > > > > took the SPL pre-loader from this card and combined it with >> > > > > the main 2016.01 u-boot. This makes the detection succeed, >> > > > > despite Marek baulking at this idea. The "good" SPL >> > > > > identifies as "U-Boot SPL 2013.01.01 (Dec 04 2014 - >> > > > > 08:59:41)" which is a different build date than the main >> > > > > u-boot on the same SD card, so which source code version it >> > > > > was built from is anyone's guess. >> > > > > >> > > > > What's interesting is that Marek's board works with u-boot >> > > > > 2016.01 while mine fails even with the very same binary. >> > > > > The boards are different revisions (his 100-0321003-C1, mine >> > > > > -E1), and the main Cyclone V chips are also different (his >> > > > > 5CSXFC6D6F31C8NES, mine 5CSXFC6D6F31C6N). >> > > > > >> > > > > Any suggestions for what to try next? >> > > > v2016.01 release or to of tree? If top of tree, try >> > > > http://patchwork.ozlabs.org/patch/570009/ >> > > Tried release, top of tree, and top of tree with that patch. >> > > Nothing works. > > Both part number is different in speed grade. This is first time I > heard about this issue. A quick suspect might due to clock. Can you > try to copy pll_config.h that is passing (from 2013.01.01) and replace > the one in 2016?
That doesn't work at all. Now it fails to detect the FPGA, then hangs after printing the amount of DRAM. -- Måns Rullgård _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot