On 01/21/2016 10:31 AM, Marek Vasut wrote: > On Thursday, January 21, 2016 at 05:20:33 PM, Måns Rullgård wrote: >> Tom Rini <tr...@konsulko.com> writes: >>> On Wed, Jan 20, 2016 at 08:31:30PM +0000, Måns Rullgård wrote: >>>> I'm having a problem with u-boot 2016.01 failing to detect the FPGA on >>>> my Altera Cyclone V SoC Development Kit. On startup, it simply prints >>>> "FPGA: Not Altera chip ID" (the ID having been read as all-zero). No >>>> amount of messing with jumpers or switches makes a difference. The >>>> software on the SD card included in the box appears to work, so on a >>>> whim I took the SPL pre-loader from this card and combined it with the >>>> main 2016.01 u-boot. This makes the detection succeed, despite Marek >>>> baulking at this idea. The "good" SPL identifies as "U-Boot SPL >>>> 2013.01.01 (Dec 04 2014 - 08:59:41)" which is a different build date >>>> than the main u-boot on the same SD card, so which source code version >>>> it was built from is anyone's guess. >>>> >>>> What's interesting is that Marek's board works with u-boot 2016.01 while >>>> mine fails even with the very same binary. The boards are different >>>> revisions (his 100-0321003-C1, mine -E1), and the main Cyclone V chips >>>> are also different (his 5CSXFC6D6F31C8NES, mine 5CSXFC6D6F31C6N). >>>> >>>> Any suggestions for what to try next? >>> >>> v2016.01 release or to of tree? If top of tree, try >>> http://patchwork.ozlabs.org/patch/570009/ >> >> Tried release, top of tree, and top of tree with that patch. Nothing >> works. > > btw. you dropped Dinh from the CC . >
Sorry, but I haven't had a chance to take a look at this. I'll try to looking this in the following week. Dinh _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot