Hi Bhuvanchandra,
On Fri, Jan 22, 2016 at 3:49 PM, Bhuvanchandra DV
<bhuvanchandra...@toradex.com> wrote:
> Add device tree files and enable serial support
> ---
> arch/arm/dts/Makefile | 3 ++-
> arch/arm/dts/vf610-twr.dts | 27 +++++++++++++++++++++++++++
> configs/vf610twr_dtb_defconfig | 13 +++++++++++++
> 3 files changed, 42 insertions(+), 1 deletion(-)
> create mode 100644 arch/arm/dts/vf610-twr.dts
> create mode 100644 configs/vf610twr_dtb_defconfig
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index f66ff41..c6fb50c 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -190,7 +190,8 @@ dtb-$(CONFIG_MACH_SUN9I) += \
> sun9i-a80-cubieboard4.dtb
>
> dtb-$(CONFIG_VF610) += vf500-colibri.dtb \
> - vf610-colibri.dtb
> + vf610-colibri.dtb \
> + vf610-twr.dtb
>
> dtb-$(CONFIG_SOC_KEYSTONE) += k2hk-evm.dtb \
> k2l-evm.dtb \
> diff --git a/arch/arm/dts/vf610-twr.dts b/arch/arm/dts/vf610-twr.dts
> new file mode 100644
> index 0000000..8f86a80
> --- /dev/null
> +++ b/arch/arm/dts/vf610-twr.dts
> @@ -0,0 +1,27 @@
> +/*
> + * Copyright 2016 Toradex AG
> + *
> + * SPDX-License-Identifier: GPL-2.0+ or X11
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
Since there is already SPDX license, we can remove the full one.
> +/dts-v1/;
> +#include "vf.dtsi"
> +
> +/ {
> + model = "VF610 Tower Board";
> + compatible = "fsl,vf610-twr", "fsl,vf610";
> +
> + choosen {
> + stdout-path = &uart1;
> + };
> +
> +};
> +
> +&uart1 {
> + status = "okay";
> +};
> diff --git a/configs/vf610twr_dtb_defconfig b/configs/vf610twr_dtb_defconfig
_dtb again?
> new file mode 100644
> index 0000000..24a7223
> --- /dev/null
> +++ b/configs/vf610twr_dtb_defconfig
> @@ -0,0 +1,13 @@
> +CONFIG_ARM=y
> +CONFIG_TARGET_VF610TWR=y
> +CONFIG_DEFAULT_DEVICE_TREE="vf610-twr"
> +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/vf610twr/imximage.cfg,ENV_IS_IN_MMC"
> +# CONFIG_CMD_IMLS is not set
> +# CONFIG_CMD_SETEXPR is not set
> +CONFIG_NAND_VF610_NFC=y
> +CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
> +CONFIG_SPI_FLASH=y
> +CONFIG_DM=y
> +CONFIG_OF_CONTROL=y
> +CONFIG_DM_SERIAL=y
> +CONFIG_FSL_LPUART=y
> --
Please reorder this via 'make savedefconfig'.
Regards,
Bin
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
