Add device tree files and enable serial support
---
arch/arm/dts/Makefile | 3 ++-
arch/arm/dts/pcm052.dts | 27 +++++++++++++++++++++++++++
configs/pcm052_dtb_defconfig | 10 ++++++++++
3 files changed, 39 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/dts/pcm052.dts
create mode 100644 configs/pcm052_dtb_defconfig
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index c6fb50c..b3bde5a 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -191,7 +191,8 @@ dtb-$(CONFIG_MACH_SUN9I) += \
dtb-$(CONFIG_VF610) += vf500-colibri.dtb \
vf610-colibri.dtb \
- vf610-twr.dtb
+ vf610-twr.dtb \
+ pcm052.dtb
dtb-$(CONFIG_SOC_KEYSTONE) += k2hk-evm.dtb \
k2l-evm.dtb \
diff --git a/arch/arm/dts/pcm052.dts b/arch/arm/dts/pcm052.dts
new file mode 100644
index 0000000..068ba2f
--- /dev/null
+++ b/arch/arm/dts/pcm052.dts
@@ -0,0 +1,27 @@
+/*
+ * Copyright 2016 Toradex AG
+ *
+ * SPDX-License-Identifier: GPL-2.0+ or X11
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/dts-v1/;
+#include "vf.dtsi"
+
+/ {
+ model = "Phytec phyCORE-Vybrid";
+ compatible = "phytec,pcm052", "fsl,vf610";
+
+ choosen {
+ stdout-path = &uart1;
+ };
+
+};
+
+&uart1 {
+ status = "okay";
+};
diff --git a/configs/pcm052_dtb_defconfig b/configs/pcm052_dtb_defconfig
new file mode 100644
index 0000000..877d973
--- /dev/null
+++ b/configs/pcm052_dtb_defconfig
@@ -0,0 +1,10 @@
+CONFIG_ARM=y
+CONFIG_TARGET_PCM052=y
+CONFIG_DEFAULT_DEVICE_TREE="pcm-052"
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/phytec/pcm052/imximage.cfg,ENV_IS_IN_NAND"
+CONFIG_NAND_VF610_NFC=y
+CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
+CONFIG_DM=y
+CONFIG_OF_CONTROL=y
+CONFIG_DM_SERIAL=y
+CONFIG_FSL_LPUART=y
--
2.7.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
