There are no callers now. Platforms which need to set up interrupts their
own way can implement an interrupt driver. Drop this function.
Signed-off-by: Simon Glass <s...@chromium.org>
Reviewed-by: Bin Meng <bmeng...@gmail.com>
---
arch/x86/cpu/irq.c | 7 -------
arch/x86/include/asm/irq.h | 10 ----------
2 files changed, 17 deletions(-)
diff --git a/arch/x86/cpu/irq.c b/arch/x86/cpu/irq.c
index e2feba7..324866c 100644
--- a/arch/x86/cpu/irq.c
+++ b/arch/x86/cpu/irq.c
@@ -83,11 +83,6 @@ static inline void fill_irq_info(struct irq_info *slot, int
bus, int device,
slot->irq[pin - 1].bitmap = irq_router.irq_mask;
}
-__weak void cpu_irq_init(void)
-{
- return;
-}
-
static int create_pirq_routing_table(void)
{
const void *blob = gd->fdt_blob;
@@ -235,8 +230,6 @@ int irq_router_common_init(struct udevice *dev)
{
int ret;
- cpu_irq_init();
-
ret = create_pirq_routing_table();
if (ret) {
debug("Failed to create pirq routing table\n");
diff --git a/arch/x86/include/asm/irq.h b/arch/x86/include/asm/irq.h
index 46e1c31..5b9e673 100644
--- a/arch/x86/include/asm/irq.h
+++ b/arch/x86/include/asm/irq.h
@@ -56,16 +56,6 @@ struct pirq_routing {
#define PIRQ_BITMAP 0xdef8
/**
- * cpu_irq_init() - Initialize CPU IRQ routing
- *
- * This initializes some platform-specific registers related to IRQ routing,
- * like configuring internal PCI devices to use which PCI interrupt pin,
- * and which PCI interrupt pin is mapped to which PIRQ line. Note on some
- * platforms, such IRQ routing might be hard-coded thus cannot configure.
- */
-void cpu_irq_init(void);
-
-/**
* irq_router_common_init() - Perform common x86 interrupt init
*
* This creates the PIRQ routing table and routes the IRQs
--
2.6.0.rc2.230.g3dd15c0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
