This driver is designed so generic that clock should also be handled in a generic way.
Like the one in Linux (drivers/usb/host/ehci-platform.c), get and enable clock(s) via Device Tree if present. Signed-off-by: Masahiro Yamada <yamada.masah...@socionext.com> --- This patch depends on new features that are still under review: http://patchwork.ozlabs.org/patch/566809/ http://patchwork.ozlabs.org/patch/566812/ Please hold this one until they go in. drivers/usb/host/ehci-generic.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/drivers/usb/host/ehci-generic.c b/drivers/usb/host/ehci-generic.c index 1292caa..44bf70b 100644 --- a/drivers/usb/host/ehci-generic.c +++ b/drivers/usb/host/ehci-generic.c @@ -5,9 +5,12 @@ */ #include <common.h> +#include <clk.h> #include <dm.h> #include "ehci.h" +#define EHCI_MAX_CLKS 3 + /* * Even though here we don't explicitly use "struct ehci_ctrl" * ehci_register() expects it to be the first thing that resides in @@ -15,12 +18,24 @@ */ struct generic_ehci { struct ehci_ctrl ctrl; + struct udevice *clk_devs[EHCI_MAX_CLKS]; + int clk_ids[EHCI_MAX_CLKS]; }; static int ehci_usb_probe(struct udevice *dev) { + struct generic_ehci *priv = dev_get_priv(dev); struct ehci_hccr *hccr = (struct ehci_hccr *)dev_get_addr(dev); struct ehci_hcor *hcor; + int i; + + for (i = 0; i < EHCI_MAX_CLKS; i++) { + priv->clk_ids[i] = fdt_clk_get(dev, i, &priv->clk_devs[i]); + if (priv->clk_ids[i] < 0) + break; + if (clk_enable(priv->clk_devs[i], priv->clk_ids[i])) + printf("failed to enable clock %d\n", priv->clk_ids[i]); + } hcor = (struct ehci_hcor *)((uintptr_t)hccr + HC_LENGTH(ehci_readl(&hccr->cr_capbase))); -- 1.9.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
