Hello Wenyou,
Am 09.12.2015 um 08:38 schrieb Wenyou Yang:
Due to introducing the PMC_PLLICPR init function, use this
function to clean up the code.
Signed-off-by: Wenyou Yang <wenyou.y...@atmel.com>
---
Changes in v2: None
arch/arm/mach-at91/spl_at91.c | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
Tested on the smartweb board, see log:
http://xeidos.ddns.net/buildbot/builders/smartweb_dfu/builds/29/steps/shell/logs/tbotlog
Tested-by: Heiko Schocher <h...@denx.de>
bye,
Heiko
diff --git a/arch/arm/mach-at91/spl_at91.c b/arch/arm/mach-at91/spl_at91.c
index b19f95b..cc3341a 100644
--- a/arch/arm/mach-at91/spl_at91.c
+++ b/arch/arm/mach-at91/spl_at91.c
@@ -14,7 +14,6 @@
#include <asm/arch/at91_common.h>
#include <asm/arch/at91sam9_matrix.h>
#include <asm/arch/at91_pit.h>
-#include <asm/arch/at91_pmc.h>
#include <asm/arch/at91_rstc.h>
#include <asm/arch/at91_wdt.h>
#include <asm/arch/clk.h>
@@ -77,8 +76,6 @@ void __weak spl_board_init(void)
void board_init_f(ulong dummy)
{
- struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
-
lowlevel_clock_init();
at91_disable_wdt();
@@ -86,7 +83,7 @@ void board_init_f(ulong dummy)
* At this stage the main oscillator is supposed to be enabled
* PCK = MCK = MOSC
*/
- writel(0x00, &pmc->pllicpr);
+ at91_pllicpr_init(0x00);
/* Configure PLLA = MOSC * (PLL_MULA + 1) / PLL_DIVA */
at91_plla_init(CONFIG_SYS_AT91_PLLA);
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
