[U-Boot] [PATCH 30/57] x86: ivybridge: Move northbridge setup to the northbridge driver

[Simon Glass]

This init can be done in the northbridge's probe() method. Move it.

Signed-off-by: Simon Glass <s...@chromium.org>
---

 arch/x86/cpu/ivybridge/northbridge.c | 17 +++++++++++++++++
 arch/x86/cpu/ivybridge/pci.c         | 20 --------------------
 2 files changed, 17 insertions(+), 20 deletions(-)

diff --git a/arch/x86/cpu/ivybridge/northbridge.c 
b/arch/x86/cpu/ivybridge/northbridge.c
index e03e472..ee09103 100644
--- a/arch/x86/cpu/ivybridge/northbridge.c
+++ b/arch/x86/cpu/ivybridge/northbridge.c
@@ -14,6 +14,7 @@
 #include <asm/cpu.h>
 #include <asm/io.h>
 #include <asm/pci.h>
+#include <asm/post.h>
 #include <asm/processor.h>
 #include <asm/arch/pch.h>
 #include <asm/arch/model_206ax.h>
@@ -283,9 +284,25 @@ static int bd82x6x_northbridge_early_init(struct udevice 
*dev)
 
 static int bd82x6x_northbridge_probe(struct udevice *dev)
 {
+       u16 reg16;
+
        if (!(gd->flags & GD_FLG_RELOC))
                return bd82x6x_northbridge_early_init(dev);
 
+       reg16 = 0xff;
+       dm_pci_read_config16(dev, PCI_COMMAND, &reg16);
+       reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+       dm_pci_write_config16(dev, PCI_COMMAND, reg16);
+
+       /*
+       * Clear non-reserved bits in status register.
+       */
+       dm_pci_write_config16(dev, PCI_STATUS, 0xffff);
+       dm_pci_write_config8(dev, PCI_LATENCY_TIMER, 0x80);
+       dm_pci_write_config8(dev, PCI_CACHE_LINE_SIZE, 0x08);
+       dm_pci_write_bar32(dev, 0, 0xf0000000);
+       post_code(0x52);
+
        bd82x6x_pci_init(dev);
        northbridge_enable(dev);
        northbridge_init(dev);
diff --git a/arch/x86/cpu/ivybridge/pci.c b/arch/x86/cpu/ivybridge/pci.c
index 8af99b4..b081469 100644
--- a/arch/x86/cpu/ivybridge/pci.c
+++ b/arch/x86/cpu/ivybridge/pci.c
@@ -19,32 +19,12 @@
 
 static int pci_ivybridge_probe(struct udevice *bus)
 {
-       struct pci_controller *hose = dev_get_uclass_priv(bus);
-       pci_dev_t dev;
-       u16 reg16;
-
        if (!(gd->flags & GD_FLG_RELOC))
                return 0;
        post_code(0x50);
        bd82x6x_init_extra();
        post_code(0x51);
 
-       reg16 = 0xff;
-       dev = PCH_DEV;
-       reg16 = x86_pci_read_config16(dev, PCI_COMMAND);
-       reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
-       x86_pci_write_config16(dev, PCI_COMMAND, reg16);
-
-       /*
-       * Clear non-reserved bits in status register.
-       */
-       pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff);
-       pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80);
-       pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08);
-
-       pci_write_bar32(hose, dev, 0, 0xf0000000);
-       post_code(0x52);
-
        return 0;
 }
 
-- 
2.6.0.rc2.230.g3dd15c0

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot