Instead of calling the northbridge and PCH init from bd82x6x_init_extra()
when the PCI bus is probed, call it from the respective drivers.

Signed-off-by: Simon Glass <s...@chromium.org>
---

 arch/x86/cpu/ivybridge/bd82x6x.c              | 42 --------------------
 arch/x86/cpu/ivybridge/northbridge.c          | 55 +++++++++++++++++++++++++--
 arch/x86/include/asm/arch-ivybridge/bd82x6x.h |  1 -
 board/google/chromebook_link/link.c           |  8 ----
 4 files changed, 52 insertions(+), 54 deletions(-)

diff --git a/arch/x86/cpu/ivybridge/bd82x6x.c b/arch/x86/cpu/ivybridge/bd82x6x.c
index cf30a3a..799d5cb 100644
--- a/arch/x86/cpu/ivybridge/bd82x6x.c
+++ b/arch/x86/cpu/ivybridge/bd82x6x.c
@@ -17,45 +17,6 @@
 #include <asm/arch/pch.h>
 #include <asm/arch/sandybridge.h>
 
-void bd82x6x_pci_init(pci_dev_t dev)
-{
-       u16 reg16;
-       u8 reg8;
-
-       debug("bd82x6x PCI init.\n");
-       /* Enable Bus Master */
-       reg16 = x86_pci_read_config16(dev, PCI_COMMAND);
-       reg16 |= PCI_COMMAND_MASTER;
-       x86_pci_write_config16(dev, PCI_COMMAND, reg16);
-
-       /* This device has no interrupt */
-       x86_pci_write_config8(dev, INTR, 0xff);
-
-       /* disable parity error response and SERR */
-       reg16 = x86_pci_read_config16(dev, BCTRL);
-       reg16 &= ~(1 << 0);
-       reg16 &= ~(1 << 1);
-       x86_pci_write_config16(dev, BCTRL, reg16);
-
-       /* Master Latency Count must be set to 0x04! */
-       reg8 = x86_pci_read_config8(dev, SMLT);
-       reg8 &= 0x07;
-       reg8 |= (0x04 << 3);
-       x86_pci_write_config8(dev, SMLT, reg8);
-
-       /* Will this improve throughput of bus masters? */
-       x86_pci_write_config8(dev, PCI_MIN_GNT, 0x06);
-
-       /* Clear errors in status registers */
-       reg16 = x86_pci_read_config16(dev, PSTS);
-       /* reg16 |= 0xf900; */
-       x86_pci_write_config16(dev, PSTS, reg16);
-
-       reg16 = x86_pci_read_config16(dev, SECSTS);
-       /* reg16 |= 0xf900; */
-       x86_pci_write_config16(dev, SECSTS, reg16);
-}
-
 static int bd82x6x_probe(struct udevice *dev)
 {
        const void *blob = gd->fdt_blob;
@@ -106,10 +67,7 @@ int bd82x6x_init_extra(void)
                return -EINVAL;
        }
 
-       bd82x6x_pci_init(PCH_DEV);
        bd82x6x_sata_enable(PCH_SATA_DEV, blob, sata_node);
-       northbridge_enable(PCH_DEV);
-       northbridge_init(PCH_DEV);
 
        return 0;
 }
diff --git a/arch/x86/cpu/ivybridge/northbridge.c 
b/arch/x86/cpu/ivybridge/northbridge.c
index 48c8cd7..2e63552 100644
--- a/arch/x86/cpu/ivybridge/northbridge.c
+++ b/arch/x86/cpu/ivybridge/northbridge.c
@@ -21,6 +21,45 @@
 
 static int bridge_revision_id = -1;
 
+static void bd82x6x_pci_init(pci_dev_t dev)
+{
+       u16 reg16;
+       u8 reg8;
+
+       debug("bd82x6x PCI init.\n");
+       /* Enable Bus Master */
+       reg16 = x86_pci_read_config16(dev, PCI_COMMAND);
+       reg16 |= PCI_COMMAND_MASTER;
+       x86_pci_write_config16(dev, PCI_COMMAND, reg16);
+
+       /* This device has no interrupt */
+       x86_pci_write_config8(dev, INTR, 0xff);
+
+       /* disable parity error response and SERR */
+       reg16 = x86_pci_read_config16(dev, BCTRL);
+       reg16 &= ~(1 << 0);
+       reg16 &= ~(1 << 1);
+       x86_pci_write_config16(dev, BCTRL, reg16);
+
+       /* Master Latency Count must be set to 0x04! */
+       reg8 = x86_pci_read_config8(dev, SMLT);
+       reg8 &= 0x07;
+       reg8 |= (0x04 << 3);
+       x86_pci_write_config8(dev, SMLT, reg8);
+
+       /* Will this improve throughput of bus masters? */
+       x86_pci_write_config8(dev, PCI_MIN_GNT, 0x06);
+
+       /* Clear errors in status registers */
+       reg16 = x86_pci_read_config16(dev, PSTS);
+       /* reg16 |= 0xf900; */
+       x86_pci_write_config16(dev, PSTS, reg16);
+
+       reg16 = x86_pci_read_config16(dev, SECSTS);
+       /* reg16 |= 0xf900; */
+       x86_pci_write_config16(dev, SECSTS, reg16);
+}
+
 int bridge_silicon_revision(void)
 {
        if (bridge_revision_id < 0) {
@@ -213,14 +252,12 @@ static void sandybridge_setup_northbridge_bars(struct 
udevice *dev)
        dm_pci_write_config8(dev, PAM6, 0x33);
 }
 
-static int bd82x6x_northbridge_probe(struct udevice *dev)
+static int bd82x6x_northbridge_early_init(struct udevice *dev)
 {
        const int chipset_type = SANDYBRIDGE_MOBILE;
        u32 capid0_a;
        u8 reg8;
 
-       if (gd->flags & GD_FLG_RELOC)
-               return 0;
 
        /* Device ID Override Enable should be done very early */
        dm_pci_read_config32(dev, 0xe4, &capid0_a);
@@ -242,6 +279,18 @@ static int bd82x6x_northbridge_probe(struct udevice *dev)
        return 0;
 }
 
+static int bd82x6x_northbridge_probe(struct udevice *dev)
+{
+       if (!(gd->flags & GD_FLG_RELOC))
+               return bd82x6x_northbridge_early_init(dev);
+
+       bd82x6x_pci_init(PCH_DEV);
+       northbridge_enable(PCH_DEV);
+       northbridge_init(PCH_DEV);
+
+       return 0;
+}
+
 static const struct udevice_id bd82x6x_northbridge_ids[] = {
        { .compatible = "intel,bd82x6x-northbridge" },
        { }
diff --git a/arch/x86/include/asm/arch-ivybridge/bd82x6x.h 
b/arch/x86/include/asm/arch-ivybridge/bd82x6x.h
index fc7fc6d..0f4fe47 100644
--- a/arch/x86/include/asm/arch-ivybridge/bd82x6x.h
+++ b/arch/x86/include/asm/arch-ivybridge/bd82x6x.h
@@ -9,7 +9,6 @@
 
 void bd82x6x_sata_init(pci_dev_t dev, const void *blob, int node);
 void bd82x6x_sata_enable(pci_dev_t dev, const void *blob, int node);
-void bd82x6x_pci_init(pci_dev_t dev);
 void bd82x6x_usb_ehci_init(pci_dev_t dev);
 void bd82x6x_usb_xhci_init(pci_dev_t dev);
 int gma_func0_init(struct udevice *dev, const void *blob, int node);
diff --git a/board/google/chromebook_link/link.c 
b/board/google/chromebook_link/link.c
index 1b97a8f..d12d742 100644
--- a/board/google/chromebook_link/link.c
+++ b/board/google/chromebook_link/link.c
@@ -14,14 +14,6 @@
 
 int arch_early_init_r(void)
 {
-       struct udevice *dev;
-       int ret;
-
-       /* Make sure the platform controller hub is up and running */
-       ret = uclass_get_device(UCLASS_PCH, 0, &dev);
-       if (ret)
-               return ret;
-
        return 0;
 }
 
-- 
2.6.0.rc2.230.g3dd15c0

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to