On 12/03/2015 02:43 PM, Simon Glass wrote:
Hi Stephen,

On 3 December 2015 at 14:33, Stephen Warren <swar...@wwwdotorg.org> wrote:
On 11/22/2015 08:53 AM, Tom Rini wrote:

On Thu, Nov 19, 2015 at 09:48:11PM +0800, Thomas Chou wrote:

Unify serial_tegra, and use the generic binding.

Signed-off-by: Thomas Chou <tho...@wytron.com.tw>
Reviewed-by: Tom Rini <tr...@konsulko.com>
Acked-by: Simon Glass <s...@chromium.org>


Applied to u-boot/master, thanks!


FYI, this patch causes at least Jetson TK1 to immediately reset at boot
time. I imagine this affects all Tegra boards, at least those that use SPL
or those that are ARMv7; my p2371-2180 Jetson TX1 ARMv8 board which doesn't
use SPL seems to still work.

I guess I'll see if I can pin-point the problem, unless you can spot an
obvious typo or something like that.

Reported-by: Kevin Hilman <khil...@linaro.org>
(Bisected by me)

Unfortunately I didn't test this patch.

Things to check:
- for SPL, that the platform data is available somewhere
- clock-frequency and reg-shift are in the device tree

The patch below appears to solve the problem. Any ideas how to fix this cleanly? I don't think we want to introduce a CONFIG_SPL_xxx for every CONFIG_xxx, yet CONFIG_IS_ENABLED() (e.g. used around arch/arm/mach-tegra/board.c's U_BOOT_DEVICE(ns16550_com1) definition) seems to require this.

Unfortunately, the patch doesn't revert cleanly, or at least would require other more recent patches to be reverted first.

Also, while debugging this I found that U-Boot force-probes any device referenced by /chosen/stdout-path even if the DT node is disabled; yet more fundamental incorrect DT processing:-( That's why the patch below only affects SPL. More fixes to actually enable the serial port in DT should be required.

diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index fbfb204e6ec8..15609e7dc773 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -1,5 +1,8 @@
 if TEGRA

+config SPL_DM_SERIAL
+       bool "Fix build"
+
 config TEGRA_COMMON
        bool "Tegra common options"
        select DM
@@ -12,6 +15,7 @@ config TEGRA_COMMON
        select DM_SPI
        select DM_SPI_FLASH
        select OF_CONTROL
+       select SPL_DM_SERIAL

 config TEGRA_ARMV7_COMMON
        bool "Tegra 32-bit common options"
diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c
index 166deabcd436..256c7eafd76e 100644
--- a/drivers/serial/ns16550.c
+++ b/drivers/serial/ns16550.c
@@ -451,5 +451,6 @@ U_BOOT_DRIVER(ns16550_serial) = {
        .priv_auto_alloc_size = sizeof(struct NS16550),
        .probe = ns16550_serial_probe,
        .ops    = &ns16550_serial_ops,
+       .flags  = DM_FLAG_PRE_RELOC,
 };
 #endif /* CONFIG_DM_SERIAL */


_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to