From: Dinh Nguyen <dinh.li...@gmail.com>
Add arch_early_init_r function. The Arria10 has a firewall protection
around the SDRAM and OCRAM. These firewalls are to be disabled in order
for U-Boot to function.
Signed-off-by: Dinh Nguyen <dingu...@opensource.altera.com>
---
v4: be consistent and use #if->else throughout
v3: s/reset_assert_all_peripherals_except_l4wd0_l4timer0/socfpga_per_reset_all
use CONFIG_SOCFPGA_GEN5
v2: reuse misc functions from a5/c5
---
arch/arm/mach-socfpga/misc.c | 51 ++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 51 insertions(+)
diff --git a/arch/arm/mach-socfpga/misc.c b/arch/arm/mach-socfpga/misc.c
index b110f5b..78774d5 100644
--- a/arch/arm/mach-socfpga/misc.c
+++ b/arch/arm/mach-socfpga/misc.c
@@ -15,6 +15,7 @@
#include <watchdog.h>
#include <asm/arch/reset_manager.h>
#include <asm/arch/scan_manager.h>
+#include <asm/arch/sdram_a10.h>
#include <asm/arch/system_manager.h>
#include <asm/arch/dwmmc.h>
#include <asm/arch/nic301.h>
@@ -31,8 +32,15 @@ static struct socfpga_system_manager *sysmgr_regs =
(struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS;
static struct socfpga_reset_manager *reset_manager_base =
(struct socfpga_reset_manager *)SOCFPGA_RSTMGR_ADDRESS;
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
static struct nic301_registers *nic301_regs =
(struct nic301_registers *)SOCFPGA_L3REGS_ADDRESS;
+#else
+static const struct socfpga_noc_fw_ocram *noc_fw_ocram_base =
+ (void *)SOCFPGA_SDR_FIREWALL_OCRAM_ADDRESS;
+static const struct socfpga_noc_fw_ddr_l3 *noc_fw_ddr_l3_base =
+ (void *)SOCFPGA_SDR_FIREWALL_L3_ADDRESS;
+#endif
static struct scu_registers *scu_regs =
(struct scu_registers *)SOCFPGA_MPUSCU_ADDRESS;
@@ -207,9 +215,14 @@ static int socfpga_fpga_id(const bool print_id)
#if defined(CONFIG_DISPLAY_CPUINFO)
int print_cpuinfo(void)
{
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
const u32 bsel = readl(&sysmgr_regs->bootinfo) & 0x7;
puts("CPU: Altera SoCFPGA Platform\n");
socfpga_fpga_id(1);
+#else
+ const u32 bsel = (readl(&sysmgr_regs->bootinfo) >> 12) & 0x7;
+ puts("CPU: Altera SoCFPGA Arria 10\n");
+#endif
printf("BOOT: %s\n", bsel_str[bsel].name);
return 0;
}
@@ -292,6 +305,7 @@ int arch_cpu_init(void)
return 0;
}
+#if defined(CONFIG_TARGET_SOCFPGA_GEN5)
/*
* Convert all NIC-301 AMBA slaves from secure to non-secure
*/
@@ -411,6 +425,43 @@ int do_bridge(cmd_tbl_t *cmdtp, int flag, int argc, char *
const argv[])
return 0;
}
+#else
+/*
++ * This function initializes security policies to be consistent across
++ * all logic units in the Arria 10.
++ *
++ * The idea is to set all security policies to be normal, nonsecure
++ * for all units.
++ */
+static void initialize_security_policies(void)
+{
+ /* Put OCRAM in non-secure */
+ writel(0x003f0000, &noc_fw_ocram_base->region0);
+ writel(0x1, &noc_fw_ocram_base->enable);
+
+ /* Put DDR in non-secure */
+ writel(0xffff0000, &noc_fw_ddr_l3_base->hpsregion0addr);
+ writel(0x1, &noc_fw_ddr_l3_base->enable);
+}
+
+int arch_early_init_r(void)
+{
+ initialize_security_policies();
+
+ /* Configure the L2 controller to make SDRAM start at 0 */
+ writel(0x1, &pl310->pl310_addr_filter_start);
+
+ /* assert reset to all except L4WD0 and L4TIMER0 */
+ socfpga_per_reset_all();
+
+ /* configuring the clock based on handoff */
+ /* TODO: Add call to cm_basic_init() */
+
+ /* Add device descriptor to FPGA device table */
+ socfpga_fpga_add();
+ return 0;
+}
+#endif
U_BOOT_CMD(
bridge, 2, 1, do_bridge,
--
2.6.2
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
