On 01.12.2015 14:22, Michal Simek wrote:
On 1.12.2015 11:46, Stefan Roese wrote:
Hi Michal,
On 01.12.2015 11:21, Michal Simek wrote:
I was checking spl/u-boot-spl.dtb and I see that you are removing
interrupt-parent property but I think that also make sense to remove
interrupt property as well because it is unused and parent is also
removed.
Just extend OF_SPL_REMOVE_PROPS by "interrupts" to save some memory.
I'm fine with this.
Another thing I was checking was that we are missing rules for removing
nodes with status = "disabled" property. I think that will be good to
add it. The reason is that I would move all that u-boot,dm-pre-reloc to
dtsi at least for now.
Hmmm. I prefer to add this "u-boot,dm-pre-reloc" to the board dts
file instead of using the dtsi files. At least for the real devices,
like UART etc. As they vary between the different boards.
How do you handle if you have 2 uarts which one is primary one?
That only one has dm-pre-reloc? Or are you using aliases?
I only mark the devices absolutely necessary in SPL for booting
with dm-pre-reloc. And that only one UART, one SPI NOR etc.
And yes, I'm also using aliases.
Perhaps its possible to enable those busses (simple-bus) needed
to traverse to the requested device automatically via fdtgrep?
That would make this much easier and less error-prone. And would
result in less "u-boot,dm-pre-reloc" occurances in the dts / dtsi
files.
I still think that instead of putting this property to every node having
one property with list of devices in chosen node is better way.
Yes, that would also be a good solution. Sprinkling these pre-reloc
properties all over the files and nodes / busses is definitely
not perfect.
Thanks,
Stefan
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot