Hello Hans,
On Mon, Nov 30, 2015 at 4:13 PM, Hans de Goede <hdego...@redhat.com> wrote: > Hi Vishnu, > >> This patch v2 of series that adds basic support for Allwinner A83T SOC >> with >> review comments addressed. > > Can you provide some quick instructions on how to test this on the > A83T HomletV2 ? > > With v1 of these patches I tried to just build them and dd them to > the sdcard, but that did not work. > > In the mean time I've figured out that I can get a serial console > with the firmware in the nand using a sdcard breakout board, so > I should be able to enter FEL mode by pressing 2 there, but it would > be really nice if the board would just boot from sdcard... > I broke microsd connector of my A83T board, so boot from microsd not tested. As you have microSD breakout UART working, you can set CONFIG_UART0_PORT_F=y and use FEL mode, commands as below sunxi-fel spl u-boot-sunxi-with-spl.bin sunxi-fel write 0x4a000000 u-boot-dtb.bin This is how i have tested it for now. > Regards, > > Hans > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
